~NEW PRODUCT~ CTP builds the ultimate intercooler for the PD crowd.

**Cam** · 04-14-2011, 10:31 PM

I'm proud to announce yet another innovative product to the CTP line up. Designed and built in house for the LC, LX and WC nut jobs wanting the most from their postive displacement blowers.

This particular unit utilizes a 4" thick core, notched fascia support and welded in place support system that is adjustable fore and aft. The system includes 3-5.5" fans that flow 315CFM each. And the ability to cool your blower in the pits by running both the fans and the circulating pump should you be so inclined.

I have plans to offer this housing assembly as a retro fit to your existing IC's after April as well.

These units can be purchased as a complete bolt in as shown or a installation kit your local fabricator or advanced shade tree mechanic can whip out in a day. Pricing will be set in the next two weeks.

The side baffles will need to be trimmed to size by the installer depending upon what car you have. And be prepared to purchase additional hose as the routing is changed compared to most of the other IC units on the market. As we complete test fitment on the various models, this will be taken into account and sold in kit form.

Independent test results: Cam's Heat Exchanger FTW---Get yours NOW!!!!!

This image has been resized. Click this bar to view the full image.

And hey!, no busting my nuts about the high dollar work bench. I have 5 new products all under developement, three motor builds going on and everything is a mess here trying to finish up a couple of cars.

And just for the LC dudes, here it is installed along with the lower grill insert system I build.
The lucky owner of this system will be taking pictures during the installation and I will update this thread accordingly. This particular unit incorporates a air diverter for the KB CAI. Also as with all CTP products, we will build to suite your individual needs.

This image has been resized. Click this bar to view the full image.

__________________

**Cam** · 04-14-2011, 10:32 PM

reserved for a little bit of tech data.

**Geri1310** · 04-14-2011, 10:39 PM

Very Nice product I want one for my 300 vortech powered srt8 :-)

**Boatman** · 04-14-2011, 10:52 PM

Great product, this unit is by far the best cooling piece out there.

**Mopar408** · 04-14-2011, 11:01 PM

Subscribed.....

Cam, you plan on testing to get a flavor for efficiency differences between this new piece and existing intercoolers?

**Cam** · 04-14-2011, 11:07 PM

Thanks Rob!

Originally Posted by Mopar408

Subscribed.....

Cam, you plan on testing to get a flavor for efficiency differences between this new piece and existing intercoolers?

Well it already has had some testing. This unit is on a KB 2.8 and running 16lbs, IAT's were only 144 degrees. This very same blower at that level with a ice box loaded ran IAT's 180-200+. One of these is heading to Arrington to be installed next week on a 3.6 KB build that at 14lbs is making 756hp. This will be a stand alone change with solid numbers to back it up.

Sorry, to answer your question. I estimate a increase in efficiency of 15-18%. Guess we'll see if I figured correctly very soon.

More on this later.