Know of a Local Tuner?

[TheBeej418]

Woohoo!!! We're up to 6 whole threads.

Anyway, anyone know where I can go get a good, reliable tune?

As I've previously mentioned somewhere amongst these threads, the engine work is next to come so I don't feel so inadequate next to people like Mr. Smith. I want a little more pep in my step but in order to do so, I'm going to need someone that can make all of my hard work come together with a good tune. Let me know if anyone knows of anything.

[MR-SMITH]

The only place I know if is in Kennesaw, GA

http://www.injectedengineering.com/location.php

[TheBeej418]

Yeah, I found them through Diablosport's website. I've heard about a place in Ohio that is very reputable, but that's a hike. Not that Kennesaw isn't.

[mark3830]

There is a place in Cleveland, TN that does that. I'll get the info.

[Mister HP]

Where are you located? We are in Decatur, IN, couple hours north of Indy. Sounds like you're farther away, but we are closer than Ohio


Let me know if I can answer any questions,
Ed

[TheBeej418]

Where are you located? We are in Decatur, IN, couple hours north of Indy. Sounds like you're farther away, but we are closer than Ohio


Let me know if I can answer any questions,
Ed

I'm in Nashville, TN so it is a bit of a haul but you're actually in a comvenient area for me. I travel to MI frequently and shoot up 65 to 69 and I'm fairly familiar with where the Decatur exit is. Do you offer full tune services? (Sorry, I'm on my mobile so your site might answer that when I check it out later) I'm looking to start with a stock tune and move in to some heavier mods throught the year so hopefully you offer a multi-tune package.

[Mister HP]

I'm in Nashville, TN so it is a bit of a haul but you're actually in a comvenient area for me. I travel to MI frequently and shoot up 65 to 69 and I'm fairly familiar with where the Decatur exit is. Do you offer full tune services? (Sorry, I'm on my mobile so your site might answer that when I check it out later) I'm looking to start with a stock tune and move in to some heavier mods throught the year so hopefully you offer a multi-tune package.

Absolutely! If you've seen the Decatur exit on I-69, we are about 20 miles dead east!
We offer full CMR tuning services, as well as in-house Dyno testing on our Dynojet 248

mods from mild to wild are available, most of which are listed on the site when you have a chance to check it out: www.lmspeed.com

upgrading your tune as your mods increase is not a problem.


Please let me know if I can answer any questions for you,
Ed

[BSHAW27]

Man HHP is in Cincy I think so they are right on the Kentucky/Ohio border. I am pretty sure they are the ones that did all the work on Mr.Morgan's Car

[robertg74]

Hey Mister HP, does the diablo tunner work with 6-speeds? I have an 09 Challenger R/T with the 6-speed and I am looking at something like the diablo for later in the year..... I don't want anything really wild as I use my Chally as a daily driver but it would be nice to get a few more HP out of her.

[Redfox0099]

I would recommend Ed at Late Model Speed, the man knows his stuff and is damm handy with a jack.

[MR-SMITH]

I would recommend Ed at Late Model Speed, the man knows his stuff and is damm handy with a jack.

Where is he located?

[Peter Parker]

I'm in Nashville, TN so it is a bit of a haul but you're actually in a comvenient area for me. I travel to MI frequently and shoot up 65 to 69 and I'm fairly familiar with where the Decatur exit is. Do you offer full tune services? (Sorry, I'm on my mobile so your site might answer that when I check it out later) I'm looking to start with a stock tune and move in to some heavier mods throught the year so hopefully you offer a multi-tune package.

Nashvegas here too....
Closest cmr tuners in person is aric@ injected, doug @ bamachips & power ported. Ed @ LM speed, Mike w/Inertia, AJ (hemituner) & HHP also excellent options too...
I've been shopping around as well to go with my heads & cam soon....

[TheBeej418]

I've been shopping around as well to go with my heads & cam soon....

That's what I'm looking to do. Are you doing the install yourself? If so, I'm so there!

[Peter Parker]

I wish, still learning though and building my tool collection. Matt from Michigan Hemi Performance is probably going to be the one to do it. He's thinking about coming to GA/AL area for a group install, if that's close enough it would be perfect...otherwise I might just drive up to him soon. Just ordered the powerbond pulley, new colder iridium plugs, and stg8 header bolts to get started on the project.

I'm really wishy washy right now but I'm leaning more Inertia.. premium big valve heads w/ srt max hell or knuckle duster cam and a custom tune from Mike. I do have a backup vehicle but also need reliability with my daily driver so I need to give Stu a call within the next week or so to discuss and order it if I decide to go with Inertia. Also, if I need coatings and stronger springs and extra upgrades to keep me off the side of the road I'm not going to skimp on the smaller stuff, especially since I'm plan on going the stroker route long term.

With this combo and my current mods & maybe a torque converter I'm shooting for low 12's if not a high 11. I know it can be done easy on dr's. I plan on doing things right the first time though to minimize breakage...

[Mister HP]

Hey Mister HP, does the diablo tunner work with 6-speeds? I have an 09 Challenger R/T with the 6-speed and I am looking at something like the diablo for later in the year..... I don't want anything really wild as I use my Chally as a daily driver but it would be nice to get a few more HP out of her.

As o f last week, the Predator was still not available for 09 R/T cars, Diablosport was still working on the new release. It should be available any day now, you may want to keep an eye on Diablosports forum for an announcement.


Mr Smith, I'll shoot you a PM

Ed