Harrop TVS 2300 blower with an intake manifold/intercooler produced by bullet. Both companies are based in Australia. It is an RDP branded kit.
This kit is for big block applications and will require the purchaser to have experience with installation and application.
Here is a picture of it installed
It will included all the parts shown
$4000 or best offer plus shipping.
Thanks for looking, Tony
T Kutz Custom / Design Cutz
Check out some of the engine cover inserts I've done on photobucket. http://s914.photobucket.com/albums/a... Kutz Designs/
Check out some under hood dress items on photobucket. http://s914.photobucket.com/albums/a...d Trim Pieces/
Check out my door sill plates on photobucket. http://s914.photobucket.com/albums/a...or SIll Plates
Contact me at email@example.com
Have Starscan - Will program...
I'm sure not to many are familiar with the brand so here is some help.
2005 Silver Magnum R/T
5.7 Stock Bottom
12.115@111mph 1.69 60'
whats going in its place is the real question...
honeycomb grille insert - rear spoiler - 20% tint - mud flaps - radio w/aux - daytona chrome 20's - daytona rear diffuser - HID 8000k lows and fogs - custom tune by Overkill- front and rear blinker mod - custom exhaust w/4'tips - painted calipers - SRT fascia - daytona chin spoiler - blacked out grille - blacked out daytona 18's - red LED interior w/license - LED reverse lights - BCR coilovers - cross drilled rotors w/full ceramic pads - Trufiber 1" hood - custom decals - pillar covers - door sill plates - BT interior goodies - 8 ring RGB halos - Tranzformer
Tony, everytime you post a for sale thread, my wallet magically finds its way into my hands, before I have to fight it off, lol!
GLWS. I'm tempted, but its a bit out of the price range right now.
2006 Inferno Red Magnum RT - firstname.lastname@example.org at TMP DA 300 Sept 28, 2012,
SRT headers, Mopar CAI, Diablosport Trinity, Stant 180 deg thermostat, Inertia Spartan Cam, 6.1 chain tensioner, B&M transmission cooler, FTI 3200, MTCM, 392 swaybars F + R, Eibach Pro-kit, Magnaflow 3" catback w/ hi-flows, 6.1 heads and intake, 2012 3.91 Getrag, OST tuned, Joelvan rad, Brembos
To be installed: PS cooler and engine oil cooler
So it's not going to work with a stock 09 5.7?
2009 Hemi Orange Challenger RT Auto, Mopar stage 1 springs, 22" wheels,AFE Stage 1 Intake,Predator, JBA Catback,Overkill CMR Tune,Hemi Orange Mopar dash kit.
Damn.. all business no BS with that kit. It may not be pretty and shoots the air straight into the intake manifold, but it's still a great blower!
Maybe I can finally show you my side mirror, and not just have you look in the rearview to see me all the time! lol
Plus, with my 6.1 heads, and the Spartan cam's minimal overlap, this could potentially, put me into the HP range of .... MADNESS!!!!!
Hey, Tony, does T Kutz designs feel like sponsoring me, lol!
I wish I could do this now, but no chance, I've got to stick to some sort of budget. Tony saw what I brought up with my car the last time I was at Scotty's, wife has not murdered me yet!
This shouldn't last long at that price... Bump..
Brilliant Black 08 Charger RT /w Road And Track
Burnt Orange 09 Ram Sport
Mods: I'm not telling
Wouldn't the user be able to swap out the snout pulley and drop the boost to a safer amount like most blowers?
You could but a better solution would be to put on an under drive pulley. The current setup is 9 pounds, 10ish with 5% overdrive.
Could the rear intake section be flip for a Jeep application ??
Agreed. Its a kind of "all business ugly" but should definitely put down some serious power.
Thrown in a few extra bucks for a trip to the polishers shop and you could have an asphalt peeling show stopper.
Wish I had the money but have everything tied up in a start-up business right now. Good luck with sale!
Kicks ass and looks good doing it.