Vortech: Which Injectors?

[BAMF]

Can anyone give me a definite answer on what injectors are included with the Vortech kit? I need to know what they actually are, but all I can find is the rated flow rate.

[MoparPosterChild]

They are SRT-4 injectors.

[BAMF]

Just to make sure... Stage-1 SRT4 injectors?

[daveleck]

The injectors from my Vortech are in Mopar boxes with the part number 04891574AD. Unfortunately, I cannot get that number to come up anywhere I search.

[Vortech]

Yes they are SRT4 injectors we had them flow tested and they came back 49.4@ 58psi of fuel pressure.

[RandysWay]

Just to let you know, I have a set of Stage 1 SRT-4 Injectors (52 lbs) that has been freshly Cleaned, Flow Tested & Balanced and all of those bells and whistles (cost me nearly $100 bucks to get them cleaned and balanced.. better than new) through New Era Performance and it comes with the cleaning paperwork. I bought these to use but ended up going with Stage 2 SRT-4 Injectors (62 lbs) as I'm running a blown 426 on 12-15 lbs of boost. PM me if you'd like to buy them.

-R

[yambra]

Yes they are SRT4 injectors we had them flow tested and they came back 49.4@ 58psi of fuel pressure.

I believe that's the rating for the 03 srt4 injectors. Which are different than the 04 and 05. I believe the 04 and 05 are the same or really close to the stage 1 injectors.

[InferAl]

The injectors from my Vortech are in Mopar boxes with the part number 04891574AD. Unfortunately, I cannot get that number to come up anywhere I search.

Yes they are SRT4 injectors we had them flow tested and they came back 49.4@ 58psi of fuel pressure.

I believe that's the rating for the 03 srt4 injectors. Which are different than the 04 and 05. I believe the 04 and 05 are the same or really close to the stage 1 injectors.

So these are the same flow as the old purple 03 SRT/4 injectors is that correct, just a little smaller than the 04-05 SRT/4 injectors which are 52 @ 58psi

[4DRHTRD]

The stage 1 injectors are 4891574AB the AD part # is for the 08 PT cruiser 2.4L turbo motor:
https://octane.trademotion.com/sfima...net%2008PT.pdf

[InferAl]

The stage 1 injectors are 4891574AB the AD part # is for the 08 PT cruiser 2.4L turbo motor:
https://octane.trademotion.com/sfima...net%2008PT.pdf

I think it is also the # for the Caliber SRT

[lafrad]

I think that is the "Stage 1" superceeded part number.

I don't think the "AB" injectors would show if you ordered them... mopar would send you the "AD"

[InferAl]

I think that is the "Stage 1" superceeded part number.

I don't think the "AB" injectors would show if you ordered them... mopar would send you the "AD"

Thats what it said when I bought them, it said 4891574-AD OLD# CH4891574-AB

I also did a search today and it said in the caliber forum that 4891574-AD was the number that was on the CSRT injectors

[4DRHTRD]

We're all on the same page then, AD is the new number for the old AB injectors.
:D

[STREET LIFE R/T]

so are they stage II or stage I.......Vortech said they are stage II... I see that modernperformance sells them but I need to know if these are the right ones.
http://www.modernperformance.com/pro...oducts_id=1125

Let me know cause, I need 8 of them.......