Results 1 to 11 of 11
  1. 11-03-2008, 10:52 PM #1
    jsl1106's Avatar
    jsl1106
    jsl1106 is offline LX Newbie
    Join Date
    Nov 2006
    Location
    Perryville, MD
    Posts
    32

    Dynotune Nitrous!

    Any opinions on the Dynotune nitrous systems. It looks like they are a considerable savings over comparable systems and components. Are they just as good as Zex or NX or NOS? Thanks!
    Reply With Quote Reply With Quote
  2. 11-03-2008, 11:10 PM #2
    hemidup
    hemidup is offline Giddyup!
    Join Date
    Nov 2006
    Location
    Minnesota
    Posts
    1,791
    I love mine. I run a 2 stage setup with their contoller.
    My name is Jerry Williams. The Grandaddy of Gen III Hemi Performance
    Reply With Quote Reply With Quote
  3. 11-04-2008, 09:25 PM #3
    1362#Sublime's Avatar
    1362#Sublime
    1362#Sublime is offline Chargers, Its all about the Chargers
    Join Date
    Apr 2007
    Location
    Columbus Ohio
    Posts
    1,013
    I took this post a diffrent way, what would you take, to the dyno if you where going to get a real Nitrous tune.

    Im sure most will know, A range of fuel and Nitrous jets, but what eles would you need?

    Mike
    Frank Racing Inc

    6.1 431 Stroker ( Fully Coated shortblock set up for Boost, 9.6 comp,), 5.7 Exstream heads w .030 Mill, 2300 Harrop RDP Blower, FRI Camshaft ATI Over Drive Pulley,Labonte Motorsports Meth Kit, Little Nitros Kit, Dynatech Headers/Cats with a SLP LM2 , Pro Torque 3400 Stall, SRT Rear end w/ 3.06 Gears and DSS Halfshafts

    490 HP and 455 TQ Before Motor and Blower Baby

    Best Run to Date...
    11.539 with a 1.599 60ft 4250 Race Weight at 117.58mph

    Thanks to Steve AKA "Frank Racing", And Sohfast94! BAD A$$ Tuner
    Reply With Quote Reply With Quote
  4. 11-04-2008, 09:55 PM #4
    JonzMgnm's Avatar
    JonzMgnm
    JonzMgnm is offline Just a squirrel, trying to get a nut....

    Join Date
    Jan 2006
    Location
    Commack, New York
    Posts
    7,052
    Quote Originally Posted by 1362#Sublime View Post
    I took this post a diffrent way, what would you take, to the dyno if you where going to get a real Nitrous tune.

    Im sure most will know, A range of fuel and Nitrous jets, but what eles would you need?

    Mike
    DynoTune is a company that manufactures nitrous kits.
    John Y
    382 RWHP / 411 RWTQ 12.25@110.46MPH
    *******************************************
    HEMI REGISTRY #426 DYNO VIDEO DYNO SHEET!

    Reply With Quote Reply With Quote
  5. 11-04-2008, 10:03 PM #5
    1362#Sublime's Avatar
    1362#Sublime
    1362#Sublime is offline Chargers, Its all about the Chargers
    Join Date
    Apr 2007
    Location
    Columbus Ohio
    Posts
    1,013
    Man I feel stupid,
    Frank Racing Inc

    6.1 431 Stroker ( Fully Coated shortblock set up for Boost, 9.6 comp,), 5.7 Exstream heads w .030 Mill, 2300 Harrop RDP Blower, FRI Camshaft ATI Over Drive Pulley,Labonte Motorsports Meth Kit, Little Nitros Kit, Dynatech Headers/Cats with a SLP LM2 , Pro Torque 3400 Stall, SRT Rear end w/ 3.06 Gears and DSS Halfshafts

    490 HP and 455 TQ Before Motor and Blower Baby

    Best Run to Date...
    11.539 with a 1.599 60ft 4250 Race Weight at 117.58mph

    Thanks to Steve AKA "Frank Racing", And Sohfast94! BAD A$$ Tuner
    Reply With Quote Reply With Quote
  6. 11-06-2008, 03:45 PM #6
    Ray@NitroDaves
    Ray@NitroDaves is offline Supporting Vendor
    Join Date
    Jan 2008
    Posts
    100
    Check out our Brand X line if you are looking for a cost effective alternative.

    http://www.nitrousoutlet.com/catalog...del=35&dept=11

    For Sales or Tech support e-mail Ray@nitrodaves.com or call 888-463-2781
    94 Pontiac Formula (The Fast Car) http://www.fquick.com/garages/Pontia...mula/1994/676/
    Nitrous Wiring Diagrams http://www.fquick.com/garages/Smart/Roadster/2000/3821/
    Reply With Quote Reply With Quote
  7. 11-09-2008, 07:46 AM #7
    jsl1106's Avatar
    jsl1106
    jsl1106 is offline LX Newbie
    Join Date
    Nov 2006
    Location
    Perryville, MD
    Posts
    32
    What is the difference between the Brand X line and the Nitrous Outlet line?
    Reply With Quote Reply With Quote
  8. 11-10-2008, 12:14 PM #8
    Ray@NitroDaves
    Ray@NitroDaves is offline Supporting Vendor
    Join Date
    Jan 2008
    Posts
    100
    The Brand X solenoids max flow 200HP
    The Nitrous Outlet solenoids max flow 400HP

    For Sales or Tech support e-mail Ray@nitrodaves.com or call 888-463-2781
    94 Pontiac Formula (The Fast Car) http://www.fquick.com/garages/Pontia...mula/1994/676/
    Nitrous Wiring Diagrams http://www.fquick.com/garages/Smart/Roadster/2000/3821/
    Reply With Quote Reply With Quote
  9. 11-15-2008, 12:51 PM #9
    Nitro Dave
    Nitro Dave is offline Supporting Vendor
    Join Date
    Apr 2008
    Posts
    640
    The Nitrous OUtket products are designed to be the best of everything. Best flow, Best design, and in some cases a few more bells and whistles.

    The Brand X products were designed for the average user shoping on a tight budget. With the Brand X products you will recive a quality product that is still backed by the most helpful and most knowledgable tech support in the industry.

    Here is a link to the new Brand X website. www.brandxnitrous.com

    Dave
    If you want the highest quality, highest flowing products backed by the most knowledgable staff with full time tech service that answers the phones full time, responds to pms, emails and post on the boards with technical information our products and our company is the choice for you.

    "The Bitterness of Poor Quality Lingers Long After The Sweetness Of Cheap Price Is Forgotten".
    Click Banner to Visit Website

    [/URL]
    Reply With Quote Reply With Quote
  10. 11-15-2008, 02:51 PM #10
    jsl1106's Avatar
    jsl1106
    jsl1106 is offline LX Newbie
    Join Date
    Nov 2006
    Location
    Perryville, MD
    Posts
    32
    Are the nano systems compatible with the Brand X valves?
    Reply With Quote Reply With Quote
  11. 11-18-2008, 12:24 PM #11
    Ray@NitroDaves
    Ray@NitroDaves is offline Supporting Vendor
    Join Date
    Jan 2008
    Posts
    100
    NO you will need to order the NANO with their valve or the NX 45* valve

    For Sales or Tech support e-mail Ray@nitrodaves.com or call 888-463-2781
    94 Pontiac Formula (The Fast Car) http://www.fquick.com/garages/Pontia...mula/1994/676/
    Nitrous Wiring Diagrams http://www.fquick.com/garages/Smart/Roadster/2000/3821/
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules