who wants to help me install my lip spoiler at R&R?

**blackmagnum06** · 05-08-2007, 03:08 AM

i just bought a charger lip spoiler and i knew a couple people have put it on their magnum like bigal...problem is i need help installing this...im going to R&R this next meet and i was wondering if anyone could help me out or should i just let the dealer install this? well i said dealer kuz im guna have them paint it brilliant black. i know theres a front end swap mod going on that day so i thought we could get the club together and at the same time do a how to for everyone else on the forums.

if this could happen, please let me know on what to take other then the spoiler of course lol

**bigal470** · 05-08-2007, 03:35 AM

I could help you out don't think the dealer will get close to this mod...you will need the following items
1) Drill - Drill bits, Phillips bits
2) Saw - Need to do some cutting...I used a hacksaw
3) Screws - I used drywall screws with washers for my initial fit.
4) Nuts and Bolts - what you want to use to permanently mount.

Also run it by Tom make sure its cool to tool.......

**blackmagnum06** · 05-08-2007, 03:38 AM

wow i dont have all those things lol i better buy them then

whose tom? is he tmag? sorry im not good on regular names

**Tmagnum** · 05-08-2007, 10:17 AM

Go ahead and bring it guys, if we can do a front end swap I'm sure we can get a front spoiler installed.

I'll try to remember to bring a few things also. If we get there and they shut us down, they shut us down, but better to have it there and hopefully help a brother out than not.

**36 chambers** · 05-08-2007, 11:26 AM

i think you have to bend it before you paint it..but i might be wrong!!!

**spenosk8er** · 05-08-2007, 04:18 PM

i would offer to help but apparently this is a different install than the charger one...

**blackmagnum06** · 05-08-2007, 11:17 PM

Originally Posted by 36 chambers

i think you have to bend it before you paint it..but i might be wrong!!!

are you serious? lol i took it to paint earlier n ill get it back maybe tomorrow...i hope that wont be an issue...would it?

if its an issue then i will have to sell it...id rather not mess it up

**blackmagnum06** · 05-08-2007, 11:24 PM

Originally Posted by bigal470

I could help you out don't think the dealer will get close to this mod...you will need the following items
1) Drill - Drill bits, Phillips bits
2) Saw - Need to do some cutting...I used a hacksaw
3) Screws - I used drywall screws with washers for my initial fit.
4) Nuts and Bolts - what you want to use to permanently mount.

Also run it by Tom make sure its cool to tool.......

can anyone take any of the above items? liek the drill bits, phillip bits and a hack saw...if not ill try to buy them

and ill take the screws nuts and bolts

**blackmagnum06** · 05-10-2007, 07:49 PM

bump ^^^^^^

**bigal470** · 05-17-2007, 06:50 PM

Originally Posted by blackmagnum06

are you serious? lol i took it to paint earlier n ill get it back maybe tomorrow...i hope that wont be an issue...would it?

if its an issue then i will have to sell it...id rather not mess it up

did you have it painted?