Results 1 to 10 of 10
  1. #1
    OurZoo's Avatar
    OurZoo is offline SRTADDICT
    Join Date
    Dec 2006
    Location
    Phoenix
    Posts
    784

    IAT Sensor Grommet

    Sooo the rubber grommet that holds the IAT sensor into the intake tube of my Charger fell apart as I switched to a different AFE CAI tube yesterday. I actually did not damage the sensor whatsoever. Currently it's being held into place by duct tape. lol I went to the dealer for an oil change today and asked to purchase the grommet. Unfortunately, the dealer does not sell these grommets separately. My service advisor said that this is the first time he's seen this happen? I would have to buy an entire new intake tube that comes with the grommet for $160. Does anyone that has switched to a CAI have a stock tube with the grommet still in it that I could buy? Any suggestions? I'll buy it if I have to. I think it's just ridiculous that I can't buy just the grommet though.

    AKA Zoo or Andrew
    '07 SBM GCSRT8
    Dyno Diablo Tuned /Bwoody Powdercoated CAI, Strut Bar, & Sway Bar Links/BORLA S Exhaust
    Phenolic Spacers/Valuecraft 180 Tstat
    360 HP/380 TQ
    '07 BB CHSRT8
    Dyno Diablo Tuned/AFE II CAI/BORLA Exhaust/Valuecraft 180 Tstat
    396 HP/401 TQ
    www.hubgarage.com/mygarage/srt8addict

  2. #2
    Junior's Avatar
    Junior is offline LX Guru

    Join Date
    Oct 2006
    Location
    Phoenix
    Posts
    14,553
    HA! That's ludicrous.

    I may have one, and if I don't, I'll measure it and you can buy one at Checker.

  3. #3
    slideway's Avatar
    slideway is offline Onward, through the fog
    Join Date
    Jun 2007
    Location
    Union co. N.J.
    Posts
    6,596
    What size is it? I have a 13/16 x 1/2 with 1/8 gap, If it fits drop me a PM and I'll send it to ya. I use them on my Air Hammer.


    Worlds first N/A stock motor LX Mopar 11sec.1/4mi. pass! Best SLB 11.660@117.63 1.70 60ft.
    Now Cartek equipped new best! heads, cam, ported intake 3,975#RW 11.071@126 1.51 60ft.

  4. #4
    OurZoo's Avatar
    OurZoo is offline SRTADDICT
    Join Date
    Dec 2006
    Location
    Phoenix
    Posts
    784
    You rock! Let me know puhhhlease. I looked through my stock intakes from both cars this afternoon and I did use the factory grommet for both CAIs so I have nothing to donate to myself. My service advisor told me he had looked through some old CAIs they have switched out in the past and what not, but couldn't find the right size for me. He also suggested I look elsewhere as he knows it's a lotta $$$ for what I actually need. This just seems silly.

    AKA Zoo or Andrew
    '07 SBM GCSRT8
    Dyno Diablo Tuned /Bwoody Powdercoated CAI, Strut Bar, & Sway Bar Links/BORLA S Exhaust
    Phenolic Spacers/Valuecraft 180 Tstat
    360 HP/380 TQ
    '07 BB CHSRT8
    Dyno Diablo Tuned/AFE II CAI/BORLA Exhaust/Valuecraft 180 Tstat
    396 HP/401 TQ
    www.hubgarage.com/mygarage/srt8addict

  5. #5
    skippytrailer's Avatar
    skippytrailer is offline Supporting Vendor
    Join Date
    Nov 2006
    Location
    Mesa, Az
    Posts
    1,588
    If you go to Pep Boys, they have a bunch of different sizes in one package, it's some kind of add on for the universal Air Filter kits you can make/buy there, wanna say it's less then $5

    2006 GoMango Daytona 2524-Sidewinder Cam- Borla-20" staggered Viper's -Diablo Predator- Painted Tails-SRT8 Suspension-AE Carbon CF CAI
    5% Tint & some airbrushed stuff
    Dinosaurs went extinct because of the Chuck Norrisaurus

  6. #6
    OurZoo's Avatar
    OurZoo is offline SRTADDICT
    Join Date
    Dec 2006
    Location
    Phoenix
    Posts
    784
    I will definitely head over to Pep Boys in the morning then! Thanks guys!

    AKA Zoo or Andrew
    '07 SBM GCSRT8
    Dyno Diablo Tuned /Bwoody Powdercoated CAI, Strut Bar, & Sway Bar Links/BORLA S Exhaust
    Phenolic Spacers/Valuecraft 180 Tstat
    360 HP/380 TQ
    '07 BB CHSRT8
    Dyno Diablo Tuned/AFE II CAI/BORLA Exhaust/Valuecraft 180 Tstat
    396 HP/401 TQ
    www.hubgarage.com/mygarage/srt8addict

  7. #7
    wheelife's Avatar
    wheelife is offline Making fast go faster.........
    Join Date
    Oct 2005
    Location
    Fredericton New Brunswick
    Posts
    2,511
    Should be a 3/4 inch hole dia., I have tons of them, if your stuck PM me with your address and I will send you one.

  8. #8
    03ramit1 is offline LX Guru
    Join Date
    Sep 2007
    Posts
    1,522
    Quote Originally Posted by skippytrailer View Post
    If you go to Pep Boys, they have a bunch of different sizes in one package, it's some kind of add on for the universal Air Filter kits you can make/buy there, wanna say it's less then $5
    you are the pep boys king arnt you.
    Retired from the Hemi world.

  9. #9
    OurZoo's Avatar
    OurZoo is offline SRTADDICT
    Join Date
    Dec 2006
    Location
    Phoenix
    Posts
    784
    Quote Originally Posted by wheelife View Post
    Should be a 3/4 inch hole dia., I have tons of them, if your stuck PM me with your address and I will send you one.
    I spoke with a CSR at AFE today and he is going to send me one no charge in the mail. If for some reason it's the wrong thing, I will hit you up. Thank you very much!

    Quote Originally Posted by 03ramit1 View Post
    you are the pep boys king arnt you.
    Lol!

    Actually, I ended up picking up a handful of detailing crap up there today. I did find the grommets within the air filter section as Damian said. Thanks again Damian btw! While I was there poking around I found an even bigger assortment of grommets for $9 in their misc. section. I'm just going to return it as I should have the right thing coming to me via USPS.

    AKA Zoo or Andrew
    '07 SBM GCSRT8
    Dyno Diablo Tuned /Bwoody Powdercoated CAI, Strut Bar, & Sway Bar Links/BORLA S Exhaust
    Phenolic Spacers/Valuecraft 180 Tstat
    360 HP/380 TQ
    '07 BB CHSRT8
    Dyno Diablo Tuned/AFE II CAI/BORLA Exhaust/Valuecraft 180 Tstat
    396 HP/401 TQ
    www.hubgarage.com/mygarage/srt8addict

  10. #10
    skippytrailer's Avatar
    skippytrailer is offline Supporting Vendor
    Join Date
    Nov 2006
    Location
    Mesa, Az
    Posts
    1,588
    Quote Originally Posted by OurZoo View Post
    Actually, I ended up picking up a handful of detailing crap up there today. I did find the grommets within the air filter section as Damian said. Thanks again Damian btw! While I was there poking around I found an even bigger assortment of grommets for $9 in their misc. section. I'm just going to return it as I should have the right thing coming to me via USPS.

    Yeah, that place is DANGEOUS ! I go there for ONE thing and leave with a bag full of goodies

    .......And your welcome....guess you owe me right, so yeah, the keys to the Jeep please

    2006 GoMango Daytona 2524-Sidewinder Cam- Borla-20" staggered Viper's -Diablo Predator- Painted Tails-SRT8 Suspension-AE Carbon CF CAI
    5% Tint & some airbrushed stuff
    Dinosaurs went extinct because of the Chuck Norrisaurus

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •