Staggered 22's

[SNEEKYFAST]

Really just a NewB signin' on, but I had to get a word in for Bones Enterprises. These guys are awesome to work with! I had been looking for the "right" wheels for the staggered look. I thought I had a couple of weeks to look. Not so, not so! I developed an air-escape hole in my stock Goodyear. I just happened to be looking at some SRT8's on Ebay, when I decided to check out the seller's other items. There they were! My staggered 22's w/tires. So, I'm talking to Danny at 10am and at 3pm, I'm having these babies put on! Talk about service! These guys are the BEST! BTW, 22" Fusions (8.5 & 9.5) with Dunlop 265's & 305's. Hub rings, lugs, stems, tax, install, out-the-door, etc. $2500. I'm stoked!!!

Pics will be coming...

[Braddah Jay]

New to the site also. Got my wheels on a month ago (i think?) Anyway i got 22"x9 1/2" +15 offset -Zenetti's wrapped on Hankook 265/35/22 on all 4. Also a rear set just for show with 22"x10 1/2" +25 offset 295/30/22. Staggered look is the sh*t! Just make sure you get the correct offset and tire size. I screwed up when i did the 10 1/2's the first time by putting on 285/35/22 and it rubbed everything in the fender-well. Good luck on the wheels! Post some pix when u get it on.

[boschargerrt]

i would look into running 305s in the rear...all 3 lx models are different in max width for the rear...the 300 can fit the widest wheel and tire, then the charger and magnum...305s, no issue on a 300, but charger will rub and so will the magnum...you should do some research or start a thread looking for help...i may be wrong, but i've read this in the past and i've heard it from vendors as well...you may have to remove some plastic on the inner and roll the fenders...unless you go w/ less meat....keep us posted...later - jimmy

[SNEEKYFAST]

Too Late! They are already on! I haven't had any issues yet... even when I jumped the railroad tracks(jk). My 8.5's are +18mm and the 9.5's are +20mm. I believe I'm gonna be all right. I'm at work tonight, but tomorrow, I'll get some pics on. There is a small 1 on my sig. See ya'

[boschargerrt]

well that awesome to here...maybe i can start to think about 305s again...can you take pics of wheel/tire clearance...thanks - jimmy

[SNEEKYFAST]

OK, Here are a couple of pics...

[Super T]

That's a lotta wheel! Lookin good!

[boschargerrt]

looks sweet bratha...i don't think that you could get any closer on the rear wheel well...later - jimmy

[SNEEKYFAST]

Thanks, I'm happy with the look. I see that I lost a couple of pics... guess they were too big. Oh well, I'll get some more. See ya'

[billy@bonesenterprises]

hey, thanks for the props. we aim to please. if you dont mind we will be adding the pics we took of your car to our customer photo album. Any of you that check it out, take a minute to look at the hottie we did some 20x10 gray foose wheels on an 06 stang. It will e under the mustang section. yes, i know its a mustang, but damn she was fine. they should be posted sometime monday.

[Josuave]

I'm looking at getting 22's with a staggered setup for my SXT Charger. 22 x 8.5 up front and 22 x 9.5 in the rear. 265/35/22 in the front, should I stick with the same size tire for the rear? I want to put the Eiback Pro Kit on to drop 1.9", and I don't want any rubbing. Thanks.

[M-Square Magnum]

Nice rims...oh yeah and welcome from Charlotte, NC.

[SNEEKYFAST]

First, I don't think a Pro-Kit is going to net 1.9. I could be wrong. Second, IMO using a wider rim but stretching out the same size tire, just doesn't look as good. That's just my opinion though.