LinkBack URL
About LinkBacksDoes anyone know of something else that could be used to remove the pins in order to swap out pads on a Brembo brake setup? I'm thinking a hammer to a large enough allen wrench?
Results 1 to 3 of 3
Thread: pin punch tool
-
08-25-2008, 03:16 PM #1
OG
- Join Date
- Oct 2007
- Location
- NYC
- Posts
- 3,360
pin punch tool
2006 Dodge Charger RT - 6.1L motor, 3.06 rear, Brembos, SRT steering & electronics * KWV2 suspension * Hotchkis sways * BWoody endlinks * SRT fascia & spoiler * Trufiber SRT hood * MSRT wheels * 6000k HID lows/fogs * Aftermarket LED headlamps * MyGIG * 1ST COMPLETE '06-'08 INTERIOR CONVERSION * AFE Stage2 CAI * catless mids * 170 tstat * Predator 93oct tune... & a bunch of other sh!t I cant remember!
-
08-25-2008, 03:55 PM #2
Finding the Line - Semper Fi
- Join Date
- Sep 2006
- Posts
- 1,163
A 8d Nail.........? (It will work, but does look to cool in the RollAway) Personally, I purchased a straight punch just for that purpose.
Laguna Seca 1.56.24 (4-22-08) 52*F 300C/SRT8 SVS Tuned
398.91 RWHP / 394.08 (ft/lbs) Torque - (2-21-09) N/A 6.1L Stock Heads & Internals
-
08-25-2008, 04:10 PM #3
My car is lower then your standards...
- Join Date
- Dec 2006
- Location
- wilbraham, ma
- Posts
- 630
Hit up harbor freight, they have brass punches and that is precicely what you need!
My car is lower then your standards _____
Reply With Quote
Posting Permissions
Share This Thread