Need Help Asap!!!!!!!!!!!!!!

[utopiapga]

Okay so I got this killer deal on a set of wheels and tires today and due to my haste I sold my wheels and tires and bought these. They are a set of 20's that are like brand new so great deal. Well I did a test fit on the fronts and found out that I needed a small spacer in the front but other than that they fit great! So I went ahead and bought them and let my other wheels go.

Well............I went to put my new wheels on and the fronts fit fine with the spacers low and behold the rears DO NOT!!!! The tires are slightly wider than my others but the reason for the rub is the wheels themselves sit in more than the stocks so now the tires slightly rub on the BACK OF THE PLASTIC WHEEL WELL TOWARDS THE FRONT OF THE TIRE!!

I guess I am needing the larger 1 inch to 1 1/4 spacer for the back wheels! So you guessed it I am SCREWED!!! I jave my car on stands sittin in the garage with no wheels to put on her!!

Is there any one out there that has a set of spacers that would work for me? It is Sunday tomorrow and I had a hard enough time finding some small spacers today let alone something like this!

PLEASE if there is anyone out there that can help a brother out PM me ASAP!! I would GREATLY APPRECIATE IT!!!!!!!!!


Thanks Hollywood

[Sharp Charge]

Where are you located? For future wheels, always check the back space and offset of the wheel. Was it a private purchase or a wheel shop?

[402 Motoring]

Put them on and lower the car. They probably won't rub. Give it a try.

Edit: What kind of wheels and what is the offset?

[utopiapga]

I know dude it was my bad got caught up in the deal and didn't check the rear but the fronts fit fine so figured there wouldn't be a problem with the rears!

I am in Pittsboro,NC it is the Raleigh Area and it was a private purchase and the guy is coo lso I could get my money back if the wheels do not work but I have already sold my others and they are long gone.

[utopiapga]

Put them on and lower the car. They probably won't rub. Give it a try.

I couldn't even get the wheel on straight it was slighly cocked by a 1/8 of an inch cause it was hitting do you think it would change that much after lowering?

[402 Motoring]

I couldn't even get the wheel on straight it was slighly cocked by a 1/8 of an inch cause it was hitting do you think it would change that much after lowering?

Tell me what wheels they are and offset

[utopiapga]

Tell me what wheels they are and offset

Okay but I don't know the offset should I measure them from the inside of the wheel to the back of the plate?

[402 Motoring]

Look at the back of the wheel, Stamped inside somewhere should be the offset. It should look like this ET __ Should say 18 or 20 if you have a rwd car.

[402 Motoring]

What brand are they?

[utopiapga]

Look at the back of the wheel, Stamped inside somewhere should be the offset. It should look like this ET __ Should say 18 or 20 if you have a rwd car.

OKay 10-4 will be right back............


They are Player Wheels........Black with Polished Lip

[utopiapga]

They are stamped 34.............

Can that be right?

[Capt Bly]

Put them on and lower the car. They probably won't rub. Give it a try.

Same thing happened to me. After it was on the ground, no rub!

[402 Motoring]

If it says ET34 then its a 34mm offset which is for an awd car not rwd. Which Player wheel is it? Do you know the name or # of the wheel?

[utopiapga]

If it says ET34 then its a 34mm offset which is for an awd car not rwd. Which Player wheel is it? Do you know the name or # of the wheel?

No but would it be stamped on the back of the wheel?

[402 Motoring]

Generally speaking most wheels will have what offset they are stamped on them in that manner. Sometimes its not easy to read. Are the wheels pretty clean?