Ground-Control (Sacramento CA) needs an SRT-8 for coilover conversion kit prototype

[4DRHTRD]

In doing research to lower my SRT-8 and continue to maintain as much factory ride as possible I found the ground-control setup for the Cadillac CTS. I came across the information while reading on how to modify the Nivomat shocks to allow a 1"+ drop on our cars. The kit sold by ground-control uses the factory front shock and strut assembly while adding a new adjustable spring perch along with an adjustable rear spring perch and parts to modify the Nivomat shock. The kit is approximately $500 for the Cadillac's which is about $800 less most coilover solution and allows us to re-use the Nivomat's.

You can see the article here:
http://cadillacfaq.com/faq/answers/l...kit/index.html

I called up ground-control and they said they had most of the work done but would like to have a local guy come to the shop to verify fitment and the Nivomat modification.
Here's the page on their CTS kit:
http://www.ground-control-store.com/...ion.php/II=715

If you live near Sacramento and you're looking to lower your car please contact Jay at ground control. You'll have to discuss pricing, time etc for this to happen.


james@ground-control.com
530-677-8600 9-5 PST

Ground Control Suspension Systems
3885 Dividend Dr
Shingle Springs, California 95682

[bookeem]

sounds great, i had ground control coilover sleeves mated with koni yellow adjustables back in my modding integra days..