LinkBack URL
About LinkBacksI notice alot of local folks that are doing , geting heads/cam. Anyone want to put an install party together?Although I know very little about the swap, I'd make a real good bitch.Would contribute everything I can!Very slow business has left me without install money, but still looking at geting FRI'ed asap.
Results 1 to 13 of 13
Thread: portland install party?
-
02-04-2009, 12:02 AM #1
#333 - I'm only half evil
- Join Date
- Nov 2007
- Location
- mcminnville,oregon
- Posts
- 251
portland install party?
DANKO SEALED SHAKER, PORTED TB, 09 INTAKE W/ CTP SPACERS, FRANKS MILLED SS HEADS,SPARROW, JBA SHORTYS, FLOWMASTER, NO CATS NO RESOS, PEDDERS TRACK II, RAZORS EDGE FRONT AND REAR STRUT TOWER BRACES, PRECISION 2800 VERTER, ZIETRONICS WIDEBAND, BT GOODIES, RIDER GRAPHIX, KILLERGLASS, TAILS BY JON . Best run: 12.70 @ 108.9
-
02-04-2009, 12:24 AM #2
I never finish anythi
- Join Date
- Oct 2007
- Location
- Hillsboro, OR
- Posts
- 922
If I'm in town, I'm there. I would not be the knowledge base, but like you, I am a good bitch.
07 Magnum R/T
Inertia Performance Heads / Spartan Max Cam 114lsa / Mopar LT's / Magnaflow Catback / Frankentake IV CAI / 180 Tstat / 6.1 injectors
/ CMR by Bob @ SVS / Edge 2800 verter / Zaino products inside and out.
Coming soon: 3.06 gears, wavetrac, 09 RT axles and 2010 Eagle Intake
-
02-04-2009, 12:48 AM #3
Alter ego of MyMaggieMae...
- Join Date
- May 2005
- Location
- Gresham OR
- Posts
- 11,710
You should PM BlueBee and see if he wants to (or can) host a two car mod party. It worked fairly well at Boogie's, but you have to have the room to tear into 2 cars at once.
Inferno Red '05 Magnum RT AWD - Who says the AWD sits too high?!
German influenced garage queen .................... German engineered daily driver
-
02-04-2009, 01:14 AM #4
The Little Engine that could!...Maybe...
- Join Date
- Dec 2008
- Location
- Portland OR
- Posts
- 245
Count me in, how soon? I should have my cam by the end of the month. Let me know.
James
Always wanted one!!! LX Forever
Mods: AFE stage II intake, Diablo, 170 tstat, LED interior and exterior, AG in-motion, SRT exhaust complete, 268 cam, BT ported TB, Forced air induction
Mods soon: 17 with DR and a CMR Tune.
-
02-05-2009, 11:55 PM #5
#333 - I'm only half evil
- Join Date
- Nov 2007
- Location
- mcminnville,oregon
- Posts
- 251
well Im definitely going to try and get my hands dirty giving BLUEBEE a hand with his upcoming head / cam swap. Mabye towards the end of the month Ill have soaked in enough info to be legitimate "help".
DANKO SEALED SHAKER, PORTED TB, 09 INTAKE W/ CTP SPACERS, FRANKS MILLED SS HEADS,SPARROW, JBA SHORTYS, FLOWMASTER, NO CATS NO RESOS, PEDDERS TRACK II, RAZORS EDGE FRONT AND REAR STRUT TOWER BRACES, PRECISION 2800 VERTER, ZIETRONICS WIDEBAND, BT GOODIES, RIDER GRAPHIX, KILLERGLASS, TAILS BY JON . Best run: 12.70 @ 108.9
-
02-26-2009, 04:45 PM #6
The Little Engine that could!...Maybe...
- Join Date
- Dec 2008
- Location
- Portland OR
- Posts
- 245
cam should be here by mid of next week. I have my mechanic buddy said he would work on it. Is anybody else want to to some mods.
JamesAlways wanted one!!! LX Forever
Mods: AFE stage II intake, Diablo, 170 tstat, LED interior and exterior, AG in-motion, SRT exhaust complete, 268 cam, BT ported TB, Forced air induction
Mods soon: 17 with DR and a CMR Tune.
-
02-26-2009, 07:02 PM #7
I never finish anythi
- Join Date
- Oct 2007
- Location
- Hillsboro, OR
- Posts
- 922
Headers are in route (last set that was in the Mopar system) and I will order my cam next week from the groupbuy going on. So I will be ready pretty soon.
07 Magnum R/T
Inertia Performance Heads / Spartan Max Cam 114lsa / Mopar LT's / Magnaflow Catback / Frankentake IV CAI / 180 Tstat / 6.1 injectors
/ CMR by Bob @ SVS / Edge 2800 verter / Zaino products inside and out.
Coming soon: 3.06 gears, wavetrac, 09 RT axles and 2010 Eagle Intake
-
02-26-2009, 07:14 PM #8
The Little Engine that could!...Maybe...
- Join Date
- Dec 2008
- Location
- Portland OR
- Posts
- 245
what cam are you ordering?
Always wanted one!!! LX Forever
Mods: AFE stage II intake, Diablo, 170 tstat, LED interior and exterior, AG in-motion, SRT exhaust complete, 268 cam, BT ported TB, Forced air induction
Mods soon: 17 with DR and a CMR Tune.
-
02-26-2009, 09:40 PM #9
I never finish anythi
- Join Date
- Oct 2007
- Location
- Hillsboro, OR
- Posts
- 922
sidewinder, there is a group buy in the vendor section. Not a lot of but better than nothing if you are going to do it anyway.
07 Magnum R/T
Inertia Performance Heads / Spartan Max Cam 114lsa / Mopar LT's / Magnaflow Catback / Frankentake IV CAI / 180 Tstat / 6.1 injectors
/ CMR by Bob @ SVS / Edge 2800 verter / Zaino products inside and out.
Coming soon: 3.06 gears, wavetrac, 09 RT axles and 2010 Eagle Intake
-
02-26-2009, 09:50 PM #10
The Little Engine that could!...Maybe...
- Join Date
- Dec 2008
- Location
- Portland OR
- Posts
- 245
Were you out with thomas that night at PIR. Just wondering if it is the same guy.
JamesAlways wanted one!!! LX Forever
Mods: AFE stage II intake, Diablo, 170 tstat, LED interior and exterior, AG in-motion, SRT exhaust complete, 268 cam, BT ported TB, Forced air induction
Mods soon: 17 with DR and a CMR Tune.
-
02-26-2009, 09:58 PM #11
#333 - I'm only half evil
- Join Date
- Nov 2007
- Location
- mcminnville,oregon
- Posts
- 251
Bluebee is doing an install this weekend , I was going to swing by and soak up what I could. After reading the install info in the knowledge section , it doesnt seem to hard. But Im sure theres some tricks...
DANKO SEALED SHAKER, PORTED TB, 09 INTAKE W/ CTP SPACERS, FRANKS MILLED SS HEADS,SPARROW, JBA SHORTYS, FLOWMASTER, NO CATS NO RESOS, PEDDERS TRACK II, RAZORS EDGE FRONT AND REAR STRUT TOWER BRACES, PRECISION 2800 VERTER, ZIETRONICS WIDEBAND, BT GOODIES, RIDER GRAPHIX, KILLERGLASS, TAILS BY JON . Best run: 12.70 @ 108.9
-
02-26-2009, 11:49 PM #12
I never finish anythi
- Join Date
- Oct 2007
- Location
- Hillsboro, OR
- Posts
- 922
Jason I will see you there, then maybe we can learn and then help each other out to save a dime or two. If Dave does good we could hire him.
James, no that wasn't me. I would hang out with Tomas, just not in public unless I have too.
Crap I still have to install that suspension I bought off Tomas too. I am behind the curve big time.......07 Magnum R/T
Inertia Performance Heads / Spartan Max Cam 114lsa / Mopar LT's / Magnaflow Catback / Frankentake IV CAI / 180 Tstat / 6.1 injectors
/ CMR by Bob @ SVS / Edge 2800 verter / Zaino products inside and out.
Coming soon: 3.06 gears, wavetrac, 09 RT axles and 2010 Eagle Intake
-
02-27-2009, 01:49 AM #13
Nitrous addict
- Join Date
- May 2008
- Location
- Portland Oregon
- Posts
- 1,721
oh yes
If I pull this off I will gladly help anyone else that wants to go through this. I will even offer up my fully tooled up garage.
426 STROKER 11.5CR built by Ding's. INERTIA STROKER CAM, Paramount Trans/TransBrake/TC/FLEX/DS/8.8 Differential with 4.10 gears, rwhp 758/ 731 rwtq
PB N/A 10.948 @ 124 w/-200DA
Nitrous PB 10.19 @ 136 MPH
Reply With Quote
Posting Permissions
Share This Thread