According to gossip, the fuel parts should arrived today (Friday). Haven't confirm with Jenn yet.
The 8.8 is there already, only waiting for D/S.
Sheesh, trembling with anticipation......this thing is taking forever.
Come on finish it already while we're young!
All kidding aside, can't wait to see it.
Stuff: Custom Engine Cover, ARIA S/N 83 CAI, 180 TStat, 85mm Throttle Body, SLP Line Lock, Corsa Sport Catback, BT Catch Can, Nose Badge, and Dress Up Kit, Hotchkis Sport Sways, MyGiG Lockpick, Tint, DRLs, Sequential Tails, MOPAR Hood Struts, Splash Guards, and Trunk Lid Liner, EZ-Pull Trunk Handles..runs like a raped ape at the strip
Never seen such a jinks car ordering parts and so on. But fuel system is here, but not all differental parts showed yet. Ya would love to see a spot on my shop floor that has not been seen in a while. I also can't wait to see it go and Wilson with a smile.
Having as much fun possible making power, with good friends 11.521@ 117.83 NA /11.007 @ 123.5 MPH N2O Stock cam and heads, diablo with DINGS CMR tune, 90mm TB, 373 gears, BB 4400 TC, (costom exhaust, CAI, ported intake manifold By DINGS), larger injectors for E-85, slicks, self made N20 kit and roll bar.
rooma zoom zoom! soon... soon
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 360SB - N2O - 340 WHP N/A - 438 WHP N2O - 13.471 @ 97.53 mph N/A - 11.949 @ 113.33 mph N2O
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L/6spd - Vortech V3 - 500+ whp/470+ wtq - 12.66 @ 112.05 - 114.22 mph best trap so far.
INTAKE MADE BY CRISS
WHIPPLE 2.9L TWIN SCREW WITH DIRECT PORT N20 ACTION BABY
393 BUILT BY TROY DING WITH LOVE
Sent from My HP laptop while taking a crap.
I think all the vendors are just teasing wilson by sending one part at a time....
426 STROKER 11.5CR built by Ding's. INERTIA STROKER CAM, Paramount Trans/TransBrake/TC/FLEX/DS/8.8 Differential with 4.10 gears, rwhp 758/ 731 rwtq
PB N/A 10.948 @ 124 w/-200DA
Nitrous PB 10.19 @ 136 MPH
Sure be nice to have parts show. Have a red car in need of the floor space.
Any new news?
All major parts (S/C, intercooler, fuel upgrade, differential, tranny, 15" brake kit) are there.
Troy been busy dialled in Bluebee this week, so the banana is waiting for her turn next week.
Need to order tranny blanket and shocks though, even though it should not delay anything for now.
If everything goes as planned, you should see a dyno result in three weeks.
I know I sound like a broken 8-track (remember 8-tracks?)
Any new new news?
Trembling with Antica
Well, unforeseen circumstances happened. Troy was busy working with J-Z's car last month. Seem that his vacuum leak worse than what Troy expect.
Good news is Troy start tearing down everything this week. Plus new parts: meth injection is on its way, torque converter is there, nitrous parts are scheduled to arrive on Thursday, LT header just came in, Afco drag pack is scheduled to arrive tomorrow (Wednesday), and the best part: XV Motorsports - Products should be arrive on Friday.
Still debating with the zex carb style perimeter so I can run 300 shot though, otherwise Troy will make a little hole for fogger style on the neck of the elbow and run 175 shot.
Just buy my plate, it will fit on there I think.....
So the Afco suspension showed up! Vehicle is on the rack. Still waiting for the intake...
work at Dings Complete Car Care, No 1/4 mile time for me in the Charger but in the '71 Mach I ran a 13.066 at 109.44 (& its a 4 speed) in my friends '09 R/T 13.725 @ 103.11