Page 19 of 20 FirstFirst ... 917181920 LastLast
Results 271 to 285 of 286
  1. #271
    Join Date
    Aug 2016
    Posts
    9
    Post Thanks / Like
    What do I need to connect the chassis harness plugs to the RER radio? They don't match up to the '05 Durango. I pulled this RER from my '09 truck that got totalled.

    Sent from my hammer and chisel using Tapatalk

  2. #272
    Join Date
    Oct 2011
    Location
    South Jersey
    Posts
    2,724
    Post Thanks / Like
    Funny that’s what I said you have to replace the two wire with the single wire. But it’s all good.
    2006 Dodge Charger R/T - 85mm Throttle Body, AFE Stage 2 CAI, 6.1 Intake Manifold, Modern Muscle Intake Adapters, 219/223 cam, 6.1 pushrods, Manley NEXTEK Valve Springs, 6.1 Timing Chain, 6.1 oil pump, Edelbrock Titech Headers, Flowmasters X pipe, Thrush 2 Chamber Mufflers, Flowmaster Resonators and tailpipes, 3200 Edge Converter, Mopar TCM, Tranzformer, Carbon Fiber Pistol Grip Shifter, 3.06, Brake Performance drilled and slotted rotors.

  3. #273
    Join Date
    Jul 2007
    Location
    San Antonio, Tx
    Posts
    148
    Post Thanks / Like
    Quote Originally Posted by HoustonGlock View Post
    What do I need to connect the chassis harness plugs to the RER radio? They don't match up to the '05 Durango. I pulled this RER from my '09 truck that got totalled.

    Sent from my hammer and chisel using Tapatalk
    Do you have the lockpic adapter?
    2009 Challenger SRT8 TorRed (AKA Tori)
    SRT Max Plus cam, Ported n Polished intake manifold/Heads w/Long Tube Headers by Rich Mack, Edelbrock E-force supercharger, tune by Dave Katz, Cat delete, 3" exhaust w/Magnaflow mufflers 180* T-stat, catch can, Hurst short throw w/pistol grip shifter, Amsoil fluids

    06 Magnum R/T AWD

    1976 Corvette L82 (gave to my Son)

  4. #274
    Join Date
    Aug 2016
    Posts
    9
    Post Thanks / Like
    Quote Originally Posted by HemiSilva View Post
    Do you have the lockpic adapter?
    No, I don't. Need to start with that?
    Which model?

  5. #275
    Join Date
    Jul 2007
    Location
    San Antonio, Tx
    Posts
    148
    Post Thanks / Like
    Quote Originally Posted by HoustonGlock View Post
    No, I don't. Need to start with that?
    Which model?
    Here ya go...

    MYGIG ADAPTER



  6. #276
    Join Date
    Aug 2011
    Location
    OR & CA
    Posts
    514
    Post Thanks / Like
    Quote Originally Posted by HoustonGlock View Post
    What do I need to connect the chassis harness plugs to the RER radio? They don't match up to the '05 Durango. I pulled this RER from my '09 truck that got totalled.

    Sent from my hammer and chisel using Tapatalk
    I don't know about the Durango, but the early LX's like my '06 had a low speed CANBus and the MYGIG RER's from the later vehicles ('08 and up, I think) used high speed buss and were not compatible.
    2006 MAGNUM SRT8
    Performance: Diablosport Trinity, TranZformer, LMI Hammer CAI,
    BT Catch Can (GETRAG 3.06)
    Appearance: RK Sport Viper Hood, Drake Billet Strut Tower Brace, BT Underhood Stuff
    Audio: MyGig, Kicker Amp & Speaker Upgrades, MTX Thunderform Subwoofer

    2006 Dodge Ram 2500 Cummins Turbodiesel 4WD


  7. #277
    Join Date
    Apr 2013
    Posts
    318
    Post Thanks / Like
    Quote Originally Posted by DerekZ View Post
    I don't know about the Durango, but the early LX's like my '06 had a low speed CANBus and the MYGIG RER's from the later vehicles ('08 and up, I think) used high speed buss and were not compatible.
    The lockpick adapter allows you run a high or low speed mygig unit. It's a dip switch setting on the unit, also in the instructions.
    I'm running a high speed rhr from a 2013 Durango in my 07 300. Only thing you have to watch for is how the radio mounts in the dash. Durango and Cherokee were different mounting.

    Sent from my SM-G935W8 using Tapatalk
    Thanks HoustonGlock thanked for this post
    Likes HoustonGlock liked this post

  8. #278
    Join Date
    Aug 2011
    Location
    OR & CA
    Posts
    514
    Post Thanks / Like
    Quote Originally Posted by Haus View Post
    The lockpick adapter allows you run a high or low speed mygig unit. It's a dip switch setting on the unit, also in the instructions.

    Sent from my SM-G935W8 using Tapatalk
    That's good. They must have updated the adapter firmware or at least added to the instructions since I put in mine about 6 years ago.

    At that time it was emphasized that you needed to have a unit that matched your car's CANBus speed. The instructions included with mine state that high speed mygig radios are not compatible.

    May be important for those buying used older setups to check on this.

  9. #279
    Join Date
    May 2005
    Location
    Woodstock, GA formally from L.I.
    Posts
    1,354
    Post Thanks / Like
    Quote Originally Posted by DerekZ View Post
    That's good. They must have updated the adapter firmware or at least added to the instructions since I put in mine about 6 years ago.

    At that time it was emphasized that you needed to have a unit that matched your car's CANBus speed. The instructions included with mine state that high speed mygig radios are not compatible.

    May be important for those buying used older setups to check on this.
    yes Lockpick adapter can be used on high or low speed mygig units but a low speed unit is required for lx retrofits. high speed units are not compatible.

    Sent from my MHA-L29 using Tapatalk

  10. #280
    Join Date
    Apr 2013
    Posts
    318
    Post Thanks / Like
    Quote Originally Posted by 300MAG View Post
    yes Lockpick adapter can be used on high or low speed mygig units but a low speed unit is required for lx retrofits. high speed units are not compatible.

    Sent from my MHA-L29 using Tapatalk
    I am running a high speed mygig in my 07 (low speed). It can be done with the lockpick adapter.

    Sent from my SM-G935W8 using Tapatalk

  11. #281
    Join Date
    May 2010
    Location
    MD
    Posts
    748
    Post Thanks / Like
    Quote Originally Posted by Haus View Post
    I am running a high speed mygig in my 07 (low speed). It can be done with the lockpick adapter.

    Sent from my SM-G935W8 using Tapatalk
    This^^^
    There's nice little dipswitch in the adapter harness that allows you to choose what speed your head unit is.
    03 Hemi Ram, 05 Magnum R/T, 06 Charger R/T
    Likes Haus liked this post

  12. #282
    Join Date
    Jul 2017
    Posts
    15
    Post Thanks / Like
    Quote Originally Posted by BlackAce View Post
    No you need to change cause you won't get a signal and you have a dual wire and you need a single wire for it to work.

    If you go back a few pages I had the same issue when I stalled mine.
    Ok, for those who don't have the EVIC you don't need to get another tuner since the mygig has it built in. All you.need is a new antenna. The am/fm antenna is separate all together and does not run off the tuner.

  13. #283
    Join Date
    Aug 2016
    Posts
    9
    Post Thanks / Like
    Quote Originally Posted by durangoman View Post
    Ok, for those who don't have the EVIC you don't need to get another tuner since the mygig has it built in. All you.need is a new antenna. The am/fm antenna is separate all together and does not run off the tuner.
    Any suggestions on an antenna?

    Sent from my hammer and chisel using Tapatalk

  14. #284
    Join Date
    Jul 2017
    Posts
    15
    Post Thanks / Like
    Quote Originally Posted by HoustonGlock View Post
    Any suggestions on an antenna?

    Sent from my hammer and chisel using Tapatalk
    I may have a extra I can sell cheap!

  15. #285
    Join Date
    Jan 2014
    Location
    Hampton Roads
    Posts
    796
    Post Thanks / Like
    Gezuz Krist. Where are the photos? Lol

    Sent from my Z981 using Tapatalk
    Previous

    '10
    Charger 3.5 (STORM!) (Engine)
    '10 Charger 5.7 Hurrache (Hurricane) (Engine)
    '10 Charger 5.7 Alexis Mercy Mercer (Mercer) R/T Police Package (Taken) but not forgotten

    '05 Chrysler 5.7 300C "Hemmissy"
    @Hemmissy_300C



Page 19 of 20 FirstFirst ... 917181920 LastLast

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •