For the past few months I have spent a few hours looking over front fascia removal guides for the Magnum. The best one here on LX forums is based on a Charger and the Magnum guides all point to the same charger write up. Below is the best of what I found during my search. I DID NOT CREATE THESE...
2 Comments

As part of my entire front suspension upgrade on my 2005 3.5L V6 RWD 300, the Inner and Outer Tie Rods are getting replaced. I'm replacing the stock/OEM ones with MOOG parts. Please note, that I am removing all parts on the front end, but this write up is exclusive to the Tie Rods so some pictures...
24 Comments

I have had a few requests for info on how I made my custom engine cover insert, so I figured I would help everyone out with a write up on it. I have worked with plastics and modeling for over 25 years now, so it is a little hard for me to judge the difficulty level of a project like this. If you...
62 Comments

or why the hell didnt dodge do this in the first place? Sure wiper delete is nice but its not practical for most. We all know how nice it woulda been for our magnums rear wiper arm to do this... Well after breaking two rear wiper arms in the same place, I decided to hit the wrecking yards for...

I looked all over for a good matching paint, but struck out left and right. I don't know if different years and models have different A-pillars, but the '06 SRT8 is a tannish color with tiny black specks in it. This is what I wound up doing. To prep the black gauge pod, all I did was scrub it...
3 Comments

As I expected, this install was not a cut and dry swap from the stock struts to the BC struts. The following is my experience with the install procedure. To start, here's a picture of the front strut parts. The front spring has been removed from the BC strut, as it obviously won't be needed....
22 Comments

LXForums can now be accessed as an app from your iPhone, Android or Blackberry! The app is called Tapatalk which is available for download from iTunes. There are two versions of the app which provide different functionality: The FREE app (located here) allows browsing of the forum, but does...
59 Comments

For those that say it's hard to do; you're right! The AWD header install is not easy to say the least, but the good news is that it can be done...and it can be done without removing the motor mounts too! Thanks to my good friend and member SVT 003 and the use of his garage and lift, the...
2 Comments