any camber adjustment in the rear?

[Hurst Equipped]

deleted

[MAGFX]

I am pretty sure that it is fixed and the only camber adjustment accessories for our cars are from Eibach or SPC (Specialty Products Co.). I think they come in ±.75° and ±1.5°. :thumbs_u:

[PHANTZM]

402Motoring has em. The rear for $58.99 plus 9.99 shipping.The fronts are more expensive and are $248.95 plus $12.99 shipping. They are priced better than all the others I have looked at. But your choice in the end.

I'll likely be getting a set soon as I am running with the Eibach Sportlines. Figure its a small price to pay until I can afford to have it bagged.

~Gary

[lowriderman3]

SPC is what I used in the rear. SPC also makes them for the front as mentioned above.

http://search.ebay.com/search/search.dll?sofocus=bs&sbrftog=1&catref=C6&from=R10&mppfqy=camber+magnum&_trksid=m37&satitle=camber+magnum&sacat=-1%26catref%3DC6&sargn=-1%26saslc%3D2&sadis=200&fpos=31313&sabfmts=1&saobfmts=insif&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1

Also there is a bushing press tool that is used to get them off and on. My mechanics shop had to order it, but yours might have it.

http://www.iapdirect.com/pictures/66010.pdf

[Kim Hufty]

The factory has 3 different length camber links that they use for build tolerances. They have a nominal , +1mm and - 1mm. Each mm gives you about .8 or .9degree adjustment which is a fair amount.
If you look on the side of the link there is a part# number peened into the link. The dealer should be able to tell you which length you have to see if you can just buy another link for adjustment.
If I remember I will get the numbers next week and post them up.

[MAGNUM8R]

Never went there, with the KW drop, my front is more tweeked than the rears, as as I have about 3/4" rake going on...

No weird tire wear, but it is dang "darty" on straight line freeway driving.


Corners like go cart tho, I like it!!!
Looks like this: / \ but works fine IMHO.