PDA

View Full Version : 300C Station Wagon release in Germany next Month


European Magnum Maniac
09-20-2004, 03:34 PM
Good morning America,
with regards FROM Old Europe
Chrysler release next month the 300 C Station Wagon! Funny enough ,you can't buy the Magnum over here (what i would prefer) Price for the RT Version should be 49990 Euros,what are in the moment 60000 USD!!! :shock:
Is there anyone out there who like to change a Magnum against a 300C???
let me know :D

DMAG
09-20-2004, 03:57 PM
Welcome to the site! I think you may be our first overseas member! ;)

E55 KEV
09-20-2004, 05:56 PM
To convert a 300C Wagon to a Magnum only requires theL

Hood
Fenders
Bumper
Grill
Headlamps
Badges

DCAutoWorker
09-21-2004, 08:45 AM
You also need the IP and dashboard as they are 300's, rear bumper is different as well.
Center caps on the rims also say Chrysler.

E55 KEV
09-21-2004, 11:49 PM
Changing the interior would be moot. Hell, if one does all that inside stuff they will also have to exchange the front seat - they have Chrysler Wing stamped on them under the headrest.

European Magnum Maniac
09-22-2004, 04:18 PM
Look at www.chrysler.de and you can see some Pics!

OA-5599
09-22-2004, 06:47 PM
Schiza! Ich vollen .. aw, forget it. I could use the headlamp assembly, back seat middle headrest, but beyond that.. um, maybe an autobahn! Gute Fart!

cwescapexlt4x4
09-23-2004, 10:27 AM
Looks sharp!!

I like the rear bumper lights (and the ability for a rear fog lamp)

Mikeyjohn
09-23-2004, 12:38 PM
Look at www.chrysler.de and you can see some Pics!

Now that's a car I could live with!!!! in the meantime I will stick with my C.

markyneutron
09-23-2004, 01:15 PM
We have built quite a few this week on my shift alone probably around 30 up to and including Wednesday. The official name is 300C Touring in plant anyway. It is causing a bit of confusion because we generally look at the track sheet that identifies it as a 300 and we see the 300 lights and then "oh crap it's a euro magnum " some jobs the worker needs to scramble back for different parts we now peer over the roof to see the liftgate open and it is OK all is going according to plan.

Holycar
09-24-2004, 01:57 AM
We have built quite a few this week on my shift alone probably around 30 up to and including Wednesday. The official name is 300C Touring in plant anyway. It is causing a bit of confusion because we generally look at the track sheet that identifies it as a 300 and we see the 300 lights and then "oh crap it's a euro magnum " some jobs the worker needs to scramble back for different parts we now peer over the roof to see the liftgate open and it is OK all is going according to plan.


Is there any difference between the US version 300C and export version ?
I think the euro version may get tighter suspension and steering ?

E55 KEV
09-27-2004, 10:18 AM
marky, when you get a chance get us some suspension part numbers for the Euro 300C. Maybe we can special ORDER them FROM a US dealer. Just a thought.

E8502
09-27-2004, 02:44 PM
Gah, why does DCX have the plates in all Euro photos!?

Rev.Hammer
09-28-2004, 11:16 AM
also dont forget that the wiring harnesses, ecu's, are also going to be different. Whta would be the cahnces of a US citizen geting one of these, is it possible, and if so, how would I get it?

markyneutron
09-28-2004, 07:57 PM
I'll take a stroll tomorrow. I know that the suspension(and some other componenets) used in the magnum are the ones that will be used for the police market due to the fact that they did not want to spend time retrofittingt the special service magnums.

markyneutron
09-29-2004, 07:49 PM
Rear shock: P04895563AA
Is different than the NA Magnum. Not sure if the second digit is zero or "O" you may need to DROP the AA. Some parts have different numbers in the real world but it is worth a shot.
Please verify what it is you are going to get so you don't wind up with a Mopar Air freshener.

I will try to dig up all the different parts but it may not be until after next week, because I will be away next week.

E55 KEV
09-30-2004, 11:29 AM
Thanks Marky, you are providing great information.

gumby
10-04-2004, 09:22 AM
I would be more then willing to swap out my magnum front end for the chrysler front end.. But I think it would be cheaper for me to buy the front end then to pay for internation freight.

Pablovision
10-04-2004, 09:29 AM
I'll bet there's some way a military personel can have one shipped over, got any friends in the forces?

Paul.

Warlock
10-06-2007, 04:41 PM
I know this thread is old, but,



I want one of those rear bumpers