Brake Caliper covers

[fatchance]

I’m having some work done on my car and the shop that has my car had a 300C with these brake caliper covers on it. They said that this is the first set and should be available soon. They cover up the caliper with a much cleaner look. They said there will be a few changes and will be offered with powder coat and personal engravings.

http://i23.photobucket.com/albums/b370/fatchance006/Brakecovers003.jpg

http://i23.photobucket.com/albums/b370/fatchance006/Brakecovers005.jpg

[Braddah Jay]

I like it! Keep us posted on any clearance issues.

[36 chambers]

ahh sweet i like!!!!!

[pigpen]

I like them!

So what will they run about for a set.

[BUTWEET]

I like those, but it looks like you lose about a quarter inch of clearance. I know a lot of wheels are already drastically close to the calipers, depending on the off-set. This could create a problem for some. I still like the clean look!

[fatchance]

I saw the car with a set of 20's on it and everything was good. But, I'm not sure how they fit with 18"s I'll find out. The wheels were on the car when I saw them at first, I had them take the wheels off to take a couple of pics.

[HemiLover]

Cool! BT are you watching?

[MR. J]

Neat idea.

Not sure if I like it. Would like to see a pic with the wheel on, because with the wheel off it looks like a plate bolted to a caliper, which is what it is.

[fatchance]

Unfortunately the wheels that were on the car covered up a lot of the brake. But, wheels that are open face this will be a nice addition.

Neat idea.

Not sure if I like it. Would like to see a pic with the wheel on, because with the wheel off it looks like a plate bolted to a caliper, which is what it is.

[Fondy]

it is a cool Idea and even better if you can make them your own with engraving

[Super T]

I agree, it looks like a plate bolted to a caliper. I'd think something that covered the outside of the caliper as well would be a lot nicer (and a lot harder to manufacturer). I'm curious to see them w/ wheels on as well. I'm picturing anodizing, powdercoating, anodizing... this could get dangerous :-) In principal though, I don't like covers that work to make things seem bigger or better than they are. Those things are pretty huge... kinda scream "If you're dumb enough to believe I have big brakes, then I have big brakes!" to me.

[DannyC]

Yea I thought they looked way to big too but they might look ok once the wheels are on.

[dc performance]

They act as "Heat Sink" for the stock calipers and help deflect the brake dust. They will be avalible in different sizes and finishes depending on wheel sizes and applications. Options include Satin, Polish, and Custom Powder Coating. Benifits include improved appearence. Patent registered letter filed. Please contact DC Parts @ dcperformance.com Att: Lyle or Tony. tony@dcperformance.com or lyleblarson@yahoo.com Phone 310-841-6996 Fax# 310-841-8979.

[TWIST3D BLACK MAG]

They act as "Heat Sink" for the stock calipers and help deflect the brake dust. They will be avalible in different sizes and finishes depending on wheel sizes and applications. Options include Satin, Polish, and Custom Powder Coating. Benifits include improved appearence. Patent registered letter filed. Please contact DC Parts @ dcperformance.com Att: Lyle or Tony. tony@dcperformance.com or lyleblarson@yahoo.com Phone 310-841-6996 Fax# 310-841-8979.


Now you gotta become a Supporting vendor..........so you can peddle your wares LEGALLY !!!

[blackmagnum06]

Price? Are These Going To Be Expensive?

[OregonR/T]

I like them. Ya they are bolt on but it cleans up the caliper alot. Keep us posted.

[dc performance]

Price? Are These Going To Be Expensive?
Until we become a sponsor of this site (either today or Monday) I will hold all marketing questions so as to comply with the rules, as to be considerate of loyal vendors to this site. I will have answers next week, Thank you for your comments and suggestion and we are looking forward to joining as a sponsor.

Lyle

[Nightshade]

Until we become a sponsor of this site (either today or Monday) I will hold all marketing questions so as to comply with the rules, as to be considerate of loyal vendors to this site. I will have answers next week, Thank you for your comments and suggestion and we are looking forward to joining as a sponsor.

Lyle

:thumbs_u: That type of attitude will definately earn some respect around here.

[feros]

Until we become a sponsor of this site (either today or Monday) I will hold all marketing questions so as to comply with the rules, as to be considerate of loyal vendors to this site. I will have answers next week, Thank you for your comments and suggestion and we are looking forward to joining as a sponsor.

Lyle

:thumbs_u: That type of attitude will definately earn some respect around here.

So so so true! Here it is better to seek vendorism than banishment!:thumbs_u:

[dc performance]

Thank you for your inquire, We will have pricing and products soon, It looks like a lot of owners want custom designs, which is a option.

DC Performance
Lyle Larson

[dc performance]

Thank you, We will add you to our owners list.

DC Performance

[dc performance]

We will probably have price for the polished and satin finish covers late next week, Thank for your interest, we are getting a lot of request for custom design work, Please let me know your input.

DC Performance
Lyle Larson

[dc performance]

Thank you, The wheels we have tested so far clear with ease, However you are right, each application has to be checked, and mounting brackets will be dedicated to certain wheels, that is what we are doing now.

DC Performance
Lyle Larson

[dc performance]

Thank you for your comments, We are offering various design and shapes (some look like a caliper) and colors, Please feel free to give more input to this "New Product" Thanks again.

DC Performance
Lyle Larson

[dc performance]

You are right, seems like a lot of request are for custom designs, Thanks for the e-mail.

DC Performance
Lyle Larson

[dc performance]

Thanks for the e-mail, We will have more info and product releases soon.

DC Performance
Lyle Larson

[dc performance]

The pricing will depend on the operations required, such as polished satin finish, and custom work would be extra, We should have the pricing done by in a couple of weeks.

DC Performance
Lyle Larson

[dc performance]

Thank you, There is much more to come, Designs colors, and custom designs, We will have pricing and our first release this month.


DC Performance
Lyle Larson

[dc performance]

Thanks Guys, We are now a member of LX, 300 AND SRT, Please bring your questions and suggestions.

DC Performance
Lyle Larson