Dang It, OUTBID AGAIN!

[Daniel454]

OK, of course I find this statement after the fact:If you see something on ebay that you'd like, 95% of the time we will end it for an LXForum member. Thanks.Anyway, I was just outbid for some 300C interior door Panels... From day one, I have preferred the 300C door panels (with the chrome strip) to the Magnum ones.

You dont by chance have another set laying around do you? I dont care if it has the door pulls or not (already have those from a 300C SRT8), and it doesnt matter if it has the memory switches or not (though I did have a few ideas for those If I had one)... But it does need to have the chrome strip at the top, and ONLY be from a 300, though it could be from a SRT8, or just about any level as long as it has the chrome in it...

????:friday: ????

[Bo]

Just an FYI.... it is not as simple as a panel swap. The handle is in a slightly different location than on the Mag/Charger panel. The good thing is that the mounting tabs for the screw are in both places on the panel. You'll need to also buy the interior rods that connect the door handle inside the car to the lock release mechanism inside the door. They will be a slight pain to swap out.
This was another of my many projects that never got completed, as the panels that I purchased on Ebay arrived damaged due to poor packaging from the seller a couple of years ago.....
Let us know how this project goes...

--Bo

[Pick-A-Part]

At this time, those were the only door panels we have. Sorry!

[Daniel454]

Just an FYI.... it is not as simple as a panel swap. The handle is in a slightly different location than on the Mag/Charger panel. The good thing is that the mounting tabs for the screw are in both places on the panel. You'll need to also buy the interior rods that connect the door handle inside the car to the lock release mechanism inside the door. They will be a slight pain to swap out.
This was another of my many projects that never got completed, as the panels that I purchased on Ebay arrived damaged due to poor packaging from the seller a couple of years ago.....
Let us know how this project goes...

--BoHEY THANKS! That does help.. I actually had a 300 owner who wanted to swap but our schedules never matched up for us both to make the drive (about 5 hours each)... but that still might be my best solution as then we could make sure to swap everything that is needed...

[Bo]

You will also want to take a look at how the panel matches up with the dash, since they are not the same as well...... May only be a cosmetic issue..... I'm doubtful there will be clearance issues.....

HTH,

--Bo

[Daniel454]

You will also want to take a look at how the panel matches up with the dash, since they are not the same as well...... May only be a cosmetic issue..... I'm doubtful there will be clearance issues.....

HTH,

--BoThanks! I will keep everyone posted... Looks like the guy who won them was also an LXFORUMS member, so that makes it not soo bad... I WILL eventually make this happen...

[Daniel454]

SOOO pick a part, whats the dirty laundry? Your ebay posts say you would suggest PAYPAL to NO-ONE, so was just curious as to why?

[BobCav]

I have never been outbid since using eSnipe www.esnipe.com (http://www.esnipe.com)

"Anti-Gun is Anti-American"
Knights of Columbus Member - "GOD"
National Rifle Association Distinguished Life Member - "GUNS"
US Navy SCPO (Retired) 1984-2004 - "GUTS"
Veteran of Foreign Wars Lifetime Member
Virginia Citizens Defense League Member - www.VCDL.org (http://www.vcdl.org/)
Member www.OpenCarry.org (http://www.opencarry.org/)
"He that hath no sword, let him sell his garment, and buy one."- Jesus Christ (Luke 22:36)

[Pick-A-Part]

I started a new topic on our board to inform all LXForum members. Feel free to read it, and make your own decision.