Gauging Interest - Custom Shift Knobs

[ESAD]

Here are the www.Billet-Customs.com (http://www.billet-customs.com/) shift knobs



Read what other people who have purchased these shift knobs have to say!

= Picture List =
High Polished (http://www.lxforums.com/board/showpost.php?p=239506&postcount=305) | Orange Brushed (http://www.lxforums.com/board/showpost.php?p=243309&postcount=322) | Blue Satin, Brushed, and HP (http://www.lxforums.com/board/showpost.php?p=246651&postcount=327)

= Customers Reactions =
2KWK4U (http://www.lxforums.com/board/showpost.php?p=240415&postcount=313) | RichL (http://www.chargerforums.com/forums/showthread.php?t=8072) | Hazman (http://www.lxforums.com/board/showpost.php?p=245670&postcount=324) | Aikidoka (http://www.lxforums.com/board/showpost.php?p=247138&postcount=332) | Dave (http://www.lxforums.com/board/showpost.php?p=248285&postcount=338) |SmokinB (http://www.lxforums.com/board/showpost.php?p=250507&postcount=351) | Grelf (http://www.lxforums.com/board/showpost.php?p=252446&postcount=374)


= Customers Pics =

SmokinB Brushed Natural (http://www.lxforums.com/board/showpost.php?p=251671&postcount=367)| Aikidoka - Satin Anodized (http://www.lxforums.com/board/showpost.php?p=247215&postcount=334)

[wheelife]

P.M. when you are ready I'm in.
Maybe R/T or Hemi etc. the "charger style" looks great!!
let me know.

[goodeforu]

Ohhhh, I am so in! Put me on the list.

[RandomAccess]

What were you thinking of charging?

[Aikidoka]

I would love this one blue with MAGNUM on it.

http://img516.imageshack.us/img516/7081/knob0yr.jpg

[Tmagnum]

I think I'd like the same , but not in blue. I think I'll paint the word Magnum in Blue.

[armadillo]

I'm in for a RED one!

[LonghornSpencer]

I want one in BURNT ORANGE like that blue one in the 1st post!

[Hazman]

I'll the same as T-magnum

[trsmagnum]

Im in for same as above

[Aikidoka]

ESAD




http://bellsouthpwp.net/R/e/Renderware/Billet-Customs-Knobs2.jpg

OK I WANT THIS.

[Padre Dave]

Definitely larger in diameter!

[stroguy]

I'm in. Like to see on with the 06 'R/T' logo in red. I like the 06 font for the 'R/T'.

[Nightshade]

Me too.. Larger Charger one you have, but just the R/T on it.. and the anodized brushed aluminum look is great.. sharp but not too much bling..

I'm in. Like to see on with the 06 'R/T' logo in red. I like the 06 font for the 'R/T'.

[SoCal_Magnum]

Do they have one that says Magnum, or R/T ?

[ckofod]

I am in for one too. Maybe the R/T or Magnum R/T split to two lines. They all look good.

[2KWK4U]

I'd like one like the one below with an SRT-8 Logo if you do these. I would also like a T-style grip if those are possible.

2KWK4U

[MrScary]

If you could add in some cook led's I would jump right on it

;)

[wheelife]

The charger style is sharp.
This gave me an idea. make a look-alike piston /hemi-spherical
include the 3? piston ring groves I assume smaller than actual size. with the 06/R/T or srt engraving just a thought.

[Drew's RT]

I like, what price range are we talking to start?

[Drew's RT]

The piston idea without any writing is up my alley.

[SDMagnumRT]

I would be in for a small black one with the r/t lettering on it (orange in 3rd picture)

[American Muscle]

Oh yes!

[stroguy]

If you can make me this one in red with the R/T logo from the rear door in the 2006 font then name your price. I just ordered a Momo knob, but I would take this custom knob anyday. Name your price and I'll send the money and return the Momo.

Randy
stroguy
2006 R/T
Spring TX

[stroguy]

Sorry forgot to get the pic in. This one in red.


http://i24.photobucket.com/albums/c6/stroguy/Billet-Customs-Knobs2.jpg

[stroguy]

Would this knob be threaded or use a set screw? I would prefer a it to be threaded butI know the alignment would be an issue.
Just wondering

Later

Randy

[ESAD]

Would this knob be threaded or use a set screw? I would prefer a it to be threaded butI know the alignment would be an issue.
Just wondering

Later

Randy

I plan on having the threads tight, and bottom out just as the knob comes into alignment. I will use either a helicoil, or other insertable steel thread.
BTW, how much did you pay for your MOMO?

[Aikidoka]

http://bellsouthpwp.net/R/e/Renderware/Billet-Customs-Knobs2.jpg

I cant wait to see how good this shifter is gonna look.
http://img527.imageshack.us/img527/1512/picture1720ix.jpg

[stroguy]

It $62.00 with shipping. I liked the shaped but did'nt care for the shade of red. Lil to bright for the red contrast I am going for. This billet in red would look mo better with the aluminum trim in my car. Are you going to be able to do this for me so I can cancel the order before it processes.

This is the Momo I ordered.

http://us.st11.yimg.com/store1.yimg.com/I/rodi_1877_58699000

Let me know.

[stroguy]

Order for the Momo has been cancelled. You are my new man ESAD.

[Davesatdoasisbar]

Is it available in bright yellow?

[ESAD]

STROGUY, I wouldn't count on it. If you read the first post, I am trying to find out if there is enough interest in doing this for it to be worth it. It is looking good so far, but I don't have enough people yet to do it.

I would require a minimum of 17 people confirmed, and prepaid.
I still have a few details to work out as well so small fluctuations in price etc. may still crop up. These will be perfect, and to do that takes a bit of prototyping first.

Right now it looks like 14 people have said they would buy one. A few have said "~cool" but that doesn't mean much other than to make me feel good and I do appreciate it! So don't get me wrong. And 3 have said they'd like a piston shifter. Which I can do as well. I just need to find a picture of a new Hemi piston! Anyone?

So, in order for me to make any ONE of the different designs, I would need 17+/- a few that wanted that specific design. (lettering doesn't apply to this rule) Meaning I don't need 17 people all wanting the crazy fluted and ribbed one with R/T on it. I just need 17 wanting the crazy fluted and ribbed one period!

[ESAD]

Is it available in bright yellow?

You can have ANY COLOR you want.

[wheelife]

G.S.M. might be able to supply a photo of a current hemi piston?

[stroguy]

Don't want a piston for a shift knob, sorry.

[stroguy]

Tell me if I make any mistakes ESAD.

How many this style, any color, Prepaid before production.
LOGOs available - MAGNUM, CHARGER, DAYTONA, R/T and SRT8

Options for lettering are:
1) Lettering is the same color as knob. Part# listing only "RT"
2) Lettering is machined after anodizing and will be raw aluminum or silver colored.. (add $10) Part# listing "RT1"
3) Custom letter colors. You'd be best served to do this yourself. Or I will do it for an additional $25. Part# listing "RT2-COLOR"

Optional Satin Finish - add $5
Optional High Polish before anodizing - add $15
Optional High Polish without anodizing - add $15
http://i24.photobucket.com/albums/c6/stroguy/Knobs.jpg

1 stroguy 00002-FLUT0-RIB0-RT, 1ea. red
2 LonghornSpencer 00001-FLUTE4-RIB5-MAGNUM, 1ea. orange
3 Aikidoka 00001-FLUTE4-RIB5-MAGNUM, 1ea. blue
4 AJ0904 00001-FLUTE4-RIB5-CHARGER, 1ea. silver
5 AJ0904 00001-FLUTE4-RIB5-MAGNUM, 1ea. silver
6 Res18cuE 00001-FLUTE4-RIB5-RT, 1 ea. silver
7 Nightshade 00001-FLUTE4-RIB5-RT, 1ea. light red
8 SDMagnumRT 00002-FLUT4-RIB0-RT, 1ea. black
9 trsmagnum 00001-FLUTE4-RIB5-MAGNUM, 1 ea. silver
10 ckofod
11 2KWK4U 00001-FLUTE4-RIB5-SRT8, 1ea. silver
12 wheelife 00002-FLUT4-RIB0-RT, 1ea. silver
13 goodeforu 00002-FLUT4-RIB0-RT, 1ea. silver (ADD SATIN FINISH)
14 Tmagnum 00001-FLUTE4-RIB5-MAGNUM, 1ea. silver
15 armadillo 00001-FLUTE4-RIB5-RT, 1 ea. red
16 Hazman 00001-FLUTE4-RIB5-MAGNUM, 1 ea. silver
17 American Muscle
18 Davesatdoasisbar
19
20
21
22 Gravy after this point

Piston style shifter. I would imagine same price range once ESAD sees what he has to do.
1-17
18 More gravy from here

Randy

[Davesatdoasisbar]

Yellow - that is good thing.
After its color then can the letters be done to remove the color in the letter?
Wouldn't assume that the cleaned letters could get another color added to them. Maybe easier to hand paint them in.
From what you show what are the approximate height and circumference of the shift handles?
Can those be skinnier on bottom and v-out bigger on top? How smooth on half cut on the back half?
Thinking out loud here to throw ideas to you, to everyone, with full understanding that certain requests may be costs prehibitive.

[stroguy]

I'm sure ESAD can do a number of things, but we will be forever saying I want this to do this and mine to be this. There are some things I would like to change, but the end product is staring us in the face and you should make this a black and white issue, yes or no and go from there. To have a singular custom design at this price is rare. If you want somthing else then the price will skyrocket out of control. Look at the thread for the LX emblems. That went through several design changes and about 40gazillion threads b4 they got their final product. They are happy but it does cause frustration on the producer. Just my two cents worth.

Randy

[Davesatdoasisbar]

Well until some walls are established, questions will always come. But until he has a bunch of ideas/requests/how tos/opinions/ he doesn't have his hands dirty into the market wants.

Then set off to the side high item one offs. Then items that vary in stock and set procedures. Do the same for design one offs. Now he has it down to what he can work on a regular basis based on time, stock, hours put in, profit, start & finish times to meet demand. As the free time is avaiable he can start doing more one off requests.

I think the concept is great, it sets our cars apart for all the others, oh, except for the 100 people ordering from you now they need to seperate from them also so the line offer expands, the more expands the more money may control outreaches of this item.

Its a great concept as long as marketing stays ahead of the game with a vision.
Good luck!!

[ESAD]

Stro, and Dave. I agree with both of you. But like you said, I'd love to, and could very well make anything you can imagine. BUT any further lathe work at this point and it's not worth it. By this I mean, flaring from small to thick at the top.

I'd like to do just these 3 designs for now plus the piston (if many want it) and if it goes well enough I'll do a lot more than this.

[Davesatdoasisbar]

Thats good - design establishemts are made.

Now for the shift handle do have aproximate height and circumforunce down for the shifters? Can it be colored to choice then the lettes be done to remove the coloring or all completed then just the letters filled with color. Not sure how that works, what you put on it. Is it painted on electrostatic painted or??

[Davesatdoasisbar]

They will be anodized.


You can have the letters colored the same as the rest of the part, or I can machine the letters after the first color anodizing which will leave them silver colored and unprotected, which means it would have to go back and get clear anodized which will add ~$20 ea. I know it would look cool and all that but I am trying to maintain a low cost.
I totally understand that you trying to do this for us a low cost but somebody might want to branch out alittle even knowing more costs are involved to get totally satisfied.within reason.

Imagine the fluted one being silver inside and the outside whatever color. . . awesome but expensive and time consuming. AND you have to be careful as hell not to scratch what has already been anodized. (not worth it to me.)No was thinking the block anodized, pre cut, the the fluted areas done, whatever are remains stays the original anodized color and the rest remains metal. Maybe have to put a clear over all that though.
Just more thoughts.
Thanks

[ESAD]

Ok. Of course, if someone wanted it, and was willing to pay for the extra time, shipping twice, and extra special handling to machine the part after it has already been anodized once. . . . I'll do it.

[stroguy]

You know what I want. Hey ESAD can you get moulding strips anodized? Say 3/8" wide anodized red like my new shift knob. Want to trim the inside of the car with them.


Thanks

Randy

[ESAD]

You know what I want. Hey ESAD can you get moulding strips anodized? Say 3/8" wide anodized red like my new shift knob. Want to trim the inside of the car with them.


Thanks

Randy

Yes but there is NO guarantee the red will match. When anodizing things, it is best to do them all at once. This would include your shift knob because next week, the red will be slightly different.

That's the nature of the beast.

[ESAD]

I am working out cost by number ordered.

I can charge less, the more that are ordered, and as I am trying to keep the cost as low as possible I will do this math. But I can tell you already, the prices have risen from what is posted in the first post.

[LonghornSpencer]

I am working out cost by number ordered.

I can charge less, the more that are ordered, and as I am trying to keep the cost as low as possible I will do this math. But I can tell you already, the prices have risen from what is posted in the first post.

How much are we talking about now? I would love to have that Orange one in the 1st post with "Hook 'Em" on top in the SRT Font! Just let me know on this
I AM IN!

[Aikidoka]

Then I will start this show for you ESAD.

How many this style, any color, any label. Prepaid before production. I would imagine $40-$80 range, estimated.
http://i24.photobucket.com/albums/c6/stroguy/Billet-Customs-Knobs2.jpg

1 stroguy 1 ea. red with "R/T"
2 LonghornSpencer 1 ea orange "HOOK EM"
3 Aikidoka - 1ea. Blue - Magnum
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 Gravy after this point

Piston style shifter. I would imagine same price range once ESAD sees what he has to do.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 More gravy from here


I am SO in on this. Just let me know how much and Ill send it right over.

[ESAD]

How much are we talking about now? I would love to have that Orange one in the 1st post with "Hook 'Em" on top in the SRT Font! Just let me know on this
I AM IN!

Looks like a minimum order of 22 units will be $62 each at this point.
I will have final prices this week.

[LonghornSpencer]

Looks like a minimum order of 22 units will be $62 each at this point.
I will have final prices this week.

Come on people we need 22 of these and then ESAD can get going. Just keep us updated on this one I WANT ONE

[stroguy]

$62 for a one of a kind shifter knob. Picture this. Beautiful girl looks in your car and says 'where did you get that'. Your response 'so you like my knob eh, it's one of a kind.' Would you like to touch it?'.

Let's get to 22 buyers now and get it done.

Go to message #39 of this thread. I am updating it as people say yes. Counting on your word to buy these from ESAD. He is doing us a big service.

Later

Randy

[Aikidoka]

$62 for a one of a kind shifter knob.
My thoughts exactly. That is nothing for a "one-off" You have to keep in mind right now that a lot of people may not have seen this post yet due to traveling for the Holiday. Either way you can count me in.

[ESAD]

Programming of the part will take place in a few days with the first proto completed in approx 3 weeks. Sorry for the delay but it's hard to fit this in when there is work that takes priority.

It looks like you will have to "loctite" the threads with this.
I will try to have them bottom out as the knob comes into alignment but the threads will not be near as tight as the stock knob.

[AJ0904]

i'm in for a silver charger one just need to know the final price plus shipping cost. I would also need silver one with magnum on it for my Dad. let me know the cost and an address to send the money.

[SDMagnumRT]

This are looking better and better everytime I check back. I am so down on this but I have a quick question, can you get the only fluted knob in the large size or does it only come in the small one?

[stroguy]

Not sure. ESAD would have to answer that.

[ESAD]

This are looking better and better everytime I check back. I am so down on this but I have a quick question, can you get the only fluted knob in the large size or does it only come in the small one?

Right now, I have 3 knobs. The 00001 series and 00002. The 00002 is either smooth sided or with 4 flutes. The 00001 is just as you see it.
All can have whatever logo/text you want.

[Res18cuE]

Just want to be clear ESAD, the 00001 series is the large size right? Duh...never mind, just saw the small print in the first pic...I'll sit down and be quiet now...

[Aikidoka]

Part# 00001-FLUT4-RIB5-MAGNUM - BLUE

This is the one I want. Just let me know when your ready to take payment and Ill get it over to you. This shifter is frigg'n killer!!!!

[stroguy]

Whatever this part # is, this one is mine.


http://i24.photobucket.com/albums/c6/stroguy/myknob.jpg

[Nightshade]

00001 series, R/T as shown on the red one.. But prefer one that matches the satin bezel colour.. and would like the R/T in red. heh

:) Lemme know prices and how to pay.. Would look awesome.

[stroguy]

Page #39 of this thread updated. Please check your name for correctness.

Randy

[ESAD]

00001 series, R/T as shown on the red one.. But prefer one that matches the satin bezel colour.. and would like the R/T in red. heh

:) Lemme know prices and how to pay.. Would look awesome.

Not sure what you are refering to "satin bezel colour"
The silver colored knobs are machined aluminum.
You would be best served if you want a naked aluminum knob with colored letters, to color them yourself. An easy way to do this would be to:

1) Degrease entire knob.
2) Mask the entire knob with 3M 2" tape.
3) Then Xacto knife out the letters very carefully.
4) Then hit the letters "lightly" with your choice of spray paint.
5) Let dry, and remove tape.

[Res18cuE]

Did ESAD just say he'd put "SRT8" on anybodys knob??? :)

[Nightshade]

Just meant that if it's anodized, don't want a dark colour on it.

have seen aluminum anodized with a silver colour just to darken it a bit.. so that would be okay.. trying to decide what would look good in my car.. Magnesium RT.. maybe black with red letters.

can you mask it off before anodizing it? black with silver letters would look cool too... sorta like what is on the first page I guess.

Not sure what you are refering to "satin bezel colour"
The silver colored knobs are machined aluminum.
You would be best served if you want a naked aluminum knob with colored letters, to color them yourself. An easy way to do this would be to:

1) Degrease entire knob.
2) Mask the entire knob with 3M 2" tape.
3) Then Xacto knife out the letters very carefully.
4) Then hit the letters "lightly" with your choice of spray paint.
5) Let dry, and remove tape.

[Res18cuE]

I'll take a #00001, 1ea. silver with "R/T" in red. Looking good! Let me know how and when to get you the gink.

[stroguy]

If I am understanding ESAD correctly, you should opt for a singular color and then paint the carved/engraved letters after receipt of your knob. Is that true ESAD?

If you go to page 4 item 39 of this thread you can see how I have been compiling this information. I fhtere are any errors in the way you would like your knob, PM me or post a reply here.

Thanks guys.
We are getting there. Spread the word.


Randy

[ESAD]

If I am understanding ESAD correctly, you should opt for a singular color and then paint the carved/engraved letters after receipt of your knob. Is that true ESAD?
Thanks guys.
We are getting there. Spread the word.


Randy

For the most part. I need to update the first post. I'll do that now so everything is clear.

[Davesatdoasisbar]

ESAD

whats the turn around time once the order has been taken?

[ESAD]

ESAD

whats the turn around time once the order has been taken?

Well, I'd suggest reading the entire thread if you haven't already. That way you can see what all is going on here. It is a little early to say that because I haven't even decided to do it yet. (depends on how many want these and will prepay)

I am deffinately making one so I will have all of the tooling designed and fabricated. (Posts, and nests for the CNC.) within 3 weeks.

Once I hit the green button, if I do. It shouldn't be long at all.
No more than 2 weeks max. Depending on several things. Like options may add to the turn around. So some people may get theirs before others.

If the oportunity ever came that I had to mass produce them, I am set up to do many thousands, 24hrs a day. Dealers? Distributors? :mrgreen:

[stroguy]

Page 4, Note 39 updated

[wheelife]

For me........(qty 1)

Part# 00002-FLUT4-RIB0-Natural-RT
Optional High Polish without anodizing

[LonghornSpencer]

Tell me if I make any mistakes ESAD.

How many this style, any color, Prepaid before production.
LOGOs available - MAGNUM, CHARGER, DAYTONA, R/T and SRT8

Options for lettering are:
1) Lettering is the same color as knob. Part# listing only "RT"
2) Lettering is machined after anodizing and will be raw aluminum or silver colored.. (add $10) Part# listing "RT1"
3) Custom letter colors. You'd be best served to do this yourself. Or I will do it for an additional $25. Part# listing "RT2-COLOR"

Optional Satin Finish - add $5
Optional High Polish before anodizing - add $15
Optional High Polish without anodizing - add $15
http://i24.photobucket.com/albums/c6/stroguy/Knobs.jpg

1 stroguy 00001-FLUTE4-RIB5-RT, 1ea. red
2 LonghornSpencer 00001-FLUTE4-RIB5-MAGNUM, 1ea. orange
3 Aikidoka 00001-FLUTE4-RIB5-MAGNUM, 1ea. blue
4 AJ0904 00001-FLUTE4-RIB5-CHARGER, 1ea. silver
5 AJ0904 00001-FLUTE4-RIB5-MAGNUM, 1ea. silver
6 Res18cuE 00001-FLUTE4-RIB5-RT, 1 ea. silver
7 Nightshade 00001-FLUTE4-RIB5-RT, 1ea. light red
8 SDMagnumRT 00002-FLUT4-RIB0-RT, 1ea. black
9 trsmagnum 00001-FLUTE4-RIB5-MAGNUM, 1 ea. silver
10 ckofod
11 2KWK4U 00001-FLUTE4-RIB5-SRT8, 1ea. silver
12 wheelife 00002-FLUT4-RIB0-RT, 1ea. silver
13 goodeforu 00002-FLUT4-RIB0-RT, 1ea. silver (ADD SATIN FINISH)
14 Tmagnum 00001-FLUTE4-RIB5-MAGNUM, 1ea. silver
15 armadillo 00001-FLUTE4-RIB5-RT, 1 ea. red
16 Hazman 00001-FLUTE4-RIB5-MAGNUM, 1 ea. silver
17 American Muscle
18 Davesatdoasisbar
19
20
21
22 Gravy after this point

Piston style shifter. I would imagine same price range once ESAD sees what he has to do.
1-17
18 More gravy from here

Randy
What are the appox. measurements on all styles again?

[ESAD]

What are the appox. measurements on all styles again?

They are listed in the first post.

[LonghornSpencer]

Sorry I noticed that a little after I posted. OH WELL
THANKS AGAIN ESAD
and I changed to just have MAGNUM on the shifter instead of Hook 'Em
They are listed in the first post.

[Res18cuE]

Optional Satin Finish - add $5
Optional High Polish before anodizing - add $15
Optional High Polish without anodizing - add $15


ESAD,

Do you have any pics showning these different finishes? It doesn't have to be our knobs, anything aluminum would do.

Thanks,

Dean

[ESAD]

ESAD,

Do you have any pics showning these different finishes? It doesn't have to be our knobs, anything aluminum would do.

Thanks,

Dean

The Satin finish will be a bead blasted or sand blasted look.
High polish will look like chrome.
High Polish before color anodize will look like a christmas ball. Colored chrome.
Anodize over fresh machined will look like machined aluminum that has been colored.

I'll attach a picture in a few mins.

[wheelife]

Mistake with mine.......
ADD (Optional High Polish without anodizing)

[ESAD]

Here is a picture of a high polished part with blue anodize finish.

[stroguy]

ESAD is that a real knob on the pic? It looks huge. I am reconsidering going to the 00002 series. Is that a pretty accurate rendering? Just looks hugmungous on the shift stick.

[LonghornSpencer]

Any pics of what the "SAT" fininsh will look like? Also, the orange is that the actual color it will be? Could I get it closer to a Burnt (TEXAS) Orange, not that far from the GOMANGO coler, rather than that tennessee orange that is so bright??? THANKS

[ESAD]

Any pics of what the "SAT" fininsh will look like? Also, the orange is that the actual color it will be? Could I get it closer to a Burnt (TEXAS) Orange, not that far from the GOMANGO coler, rather than that tennessee orange that is so bright??? THANKS

The only way you can get the exact color you want it to send me a sample.
Then you are subject to an additional fee to custom match your color.
At this time, I don't know what that fee is.

[Aikidoka]

Gonna say thanks again for all the time and work your putting into this ESAD. After seeing the size of the 00001 model I may go with the 00002-FLUT4-RIB11-BLUE-Magnum now. Ill hold off till I see how all the mock-ups come out. Either way Im still in for one.

[LonghornSpencer]

I think this size is fine! THANKS for all the work on this one ESAD

[Res18cuE]

I'll probably change to the 00002 w/flutes & ribs. While I like the 00001, if the scale in the picture is correct, to me it's too big for the shaft it sits on. I echo LonghornSpencer's thanks for all the work you've done ESAD!

[stroguy]

I like the design. But, it is quite overwhelming for the shaft it sits on.

[ESAD]

I like the design. But, it is quite overwhelming for the shaft it sits on.

Yep, they did give us a tiny shaft didn't they.

[Nightshade]

I agree as well,

I would rather have the 00002 w/flutes & ribs too.. basically the 00001 but smaller.. ;) with R/T of course.. and in silver not red..

Joe.

I'll probably change to the 00002 w/flutes & ribs. While I like the 00001, if the scale in the picture is correct, to me it's too big for the shaft it sits on. I echo LonghornSpencer's thanks for all the work you've done ESAD!

[RandomAccess]

ESAD,

I like the look... but... I think it's kind of square. I like to rest my hand on the shifter when driving... and when it is in the rear most position in drive... That may be uncomfortable.

Have you consider making the top rounded, and tapering the bottom.

Michael

[ESAD]

ESAD,

I like the look... but... I think it's kind of square. I like to rest my hand on the shifter when driving... and when it is in the rear most position in drive... That may be uncomfortable.

Have you consider making the top rounded, and tapering the bottom.

Michael

I can't taper to a smaller size as the knobs go to the bottom at this price point.
Maybe for the next series. I don't want to make the top round (like a ball). These are supposed to be squarish by design.

On the 00002 series, the top of the SRT logo'd knobs will have a small radius. This is to accommodate the SRT logo. The others have a slightly larger radius on top. Since this knob is so small, I may have to resort to lasering on the logos instead of machining them on.

[ESAD]

Please check out the new knob posted in the first post.

Extremely limited, please let me know what you guys think!!

[stroguy]

Where do I send the money ESAD?

[LonghornSpencer]

I think I am going to change...for now...00002-FLUT4-RIB11-ORANGE-MAGNUM

[ESAD]

Where do I send the money ESAD?

Until I get the website completed. Paypal me. PM for address.

[LonghornSpencer]

The only way you can get the exact color you want it to send me a sample.
Then you are subject to an additional fee to custom match your color.
At this time, I don't know what that fee is.

Let me know on the color matching price as I am having some interior pieces the same color and would like to have this the same as well. Also any pics of the SAT finish??? Thanks

[ESAD]

Let me know on the color matching price as I am having some interior pieces the same color and would like to have this the same as well. Also any pics of the SAT finish??? Thanks

As I said in an earlier post re: anodizing.
If you want to anodize multiple parts, send them ALL to me.
They must all be done at once. Otherwise they will be different colors.

SO, if you want them "burnt orange" I will need a sample containing the exact color, and images of everything you want anodized before hand so I can give you a quote.

[Lik2race]

ESAD,
Will there be,at a later date,any of the "HURST T" StyleShifters w/logos ( HEMI,300C,MAGNUM,etc.)available ?
I have one of the Brushed Aluminum "T" handle HURST shifters now,I would like to have something similar,
either Polished or Brushed ,with HEMI logo engraved along the horizontal side. Any consideration on this matter will be appreciated deeply.
Thanks,
Stan aka Lik2race

[ESAD]

ESAD,
Will there be,at a later date,any of the "HURST T" StyleShifters w/logos ( HEMI,300C,MAGNUM,etc.)available ?
I have one of the Brushed Aluminum "T" handle HURST shifters now,I would like to have something similar,
either Polished or Brushed ,with HEMI logo engraved along the horizontal side. Any consideration on this matter will be appreciated deeply.
Thanks,
Stan aka Lik2race

Sure! I can make them. Piece of cake.
I don't know if I can beat their price. . . see that's the difficult part.
I believe they cast theirs.
Mine would of course, be billet aluminum with cool things like MAGNUM, or HEMI engraved in them. . . :)

[Lik2race]

Sure! I can make them. Piece of cake.
I don't know if I can beat their price. . . see that's the difficult part.
I believe they cast theirs.
Mine would of course, be billet aluminum with cool things like MAGNUM, or HEMI engraved in them. . . :)
Thanks for the reply. Whenever you get caught up,
could you post an example of what it would look like,
and a cost ?
Thanks,Again
Stan

[ESAD]

Thanks for the reply. Whenever you get caught up,
could you post an example of what it would look like,
and a cost ?
Thanks,Again
Stan

Ok, here it is. I posted it in the first post of this thread.
Price is TBD.
It will be available with the same text and logos.

[BrilliantBlackHemi]

ESAD, did I mention I really like that sig pic? That would be a cool paint scheme for real. You thought about painting it that way?

[ESAD]

ESAD, did I mention I really like that sig pic? That would be a cool paint scheme for real. You thought about painting it that way?

Yes I have man! I want to, but right now it's my only transportation so. . .
Thanks! PS does wonders doesn't it?

[67alecto]

So if I'm reading this thread (and post #39) correctly, the only choices are the rectangular ones?

If you're taking down names for the chrome "ball" shifter with the HEMI on it, I'm down.

[Banshee]

do you have any pictures of the machined parts and not of the computer graphics??

[ESAD]

do you have any pictures of the machined parts and not of the computer graphics??

Not yet. If you read the entire thread you will see what is going on.
I am 3 weeks away from the first prototypes.
If I had the parts done, I think they would all be gone by now :)
This is not for any other reason except that there is other work on the machines. Parts that total in the thousands. . . .

Since the renderings are exactly what the parts will look like. . . this gives you a very good idea. The whole purpose of posting the renderings is to "Gauge your interest" in these parts. I will not make anything if there is no interest in the first place. :)

[ESAD]

So if I'm reading this thread (and post #39) correctly, the only choices are the rectangular ones?

If you're taking down names for the chrome "ball" shifter with the HEMI on it, I'm down.

None are available at this time. It is the number of people that want them that makes them available. For now, these are "made to order" not to be stocked.
It looks like the first one to be made will be the 00001 series.

NOTE:There have been a number of people that have said this knob is too large. I will make one proto at 2" diameter. Then I will post some pics. If everyone likes it, I'll make it. If not, I will make it smaller until everyone likes it.

I am always taking names, because that will let me know if any particular one is worth the time and effort to produce.

[Nightshade]

Maybe it would be a good idea to start a new thread on this.. is getting kinda long.. hard to find any relavent information in it.. Maybe a new thread with a summary of what you are offering.. :)

[ESAD]

Maybe it would be a good idea to start a new thread on this.. is getting kinda long.. hard to find any relavent information in it.. Maybe a new thread with a summary of what you are offering.. :)

That is why I only update the first post.
I'd hate to clutter up the forums. . .

[wheelife]

:doh:OK OK....I changed my mind.....
Part# 00002-FLUT4-RIB11-natural-RT
Optional High Polish without anodizing - add $15
Let me know when you are ready I am in!!!

[stroguy]

ESAD. I changed mine to the smaller, it will be 00002-FLUT0-RIB11-RED-RT


Thanks

[LonghornSpencer]

I think I am going to change...for now...00002-FLUT4-RIB11-ORANGE-MAGNUM

I want to change to the smaller one also. THANKS ESAD

[LonghornSpencer]

[QUOTE=ESAD]Is this list still good? Is everyone still in or. . .?
If your name is on the list, please confirm what part# you want.

PLEASE NOTE OPTIONS HAVE CHANGED. THERE IS NO LONGER A SATIN or "BLASTED" option as clearcoat anodize is offline.
"BRUSHED" has been added. Everyone should know what that looks like.

THOSE WHO HAVE "NATURAL" AS THEIR COLOR NEED TO DECIDE IF THEY WANT TO ADD "HP" (for high polish) OR "BR" (for brushed) OR "MACH" (for machined look) AFTER IT.

I have attached an image of what "machined look" is. These parts are old and scratched, so ignore the scratches. The light reflecting off the tool marks is what you can expect. Adding the HP option, will give you a chrome-like look.

SERIES 00001 LIST

1 Aikidoka 00001-FLUTE4-RIB5-BLUE-MAGNUM, 1ea.
2 AJ0904 00001-FLUTE4-RIB5-NATURAL-CHARGER, 1ea.
3 AJ0904 00001-FLUTE4-RIB5-NATURAL-MAGNUM, 1ea.
4 Res18cuE 00001-FLUTE4-RIB5-NATURAL-RT, 1 ea.
5 Nightshade 00001-FLUTE4-RIB5-RED-RT, 1ea.
6 trsmagnum 00001-FLUTE4-RIB5-NATURAL-MAGNUM, 1 ea.
7 ckofod
8 2KWK4U 00001-FLUTE4-RIB5-NATURAL-SRT8, 1ea.
9 14 Tmagnum 00001-FLUTE4-RIB5-NATURAL-MAGNUM, 1ea.
10 armadillo 00001-FLUTE4-RIB5-RED-RT, 1 ea. red
11 Hazman 00001-FLUTE4-RIB5-NATURAL-MAGNUM, 1 ea.
12 American Muscle
13 Davesatdoasisbar
14
15
16
17
18
19
20
21

SERIES 00002 LIST
1 SDMagnumRT 00002-FLUT4-RIB0-BLACK-RT, 1ea.
2 wheelife 00002-FLUT4-RIB11-NATURAL-RT, 1ea.
3 goodeforu 00002-FLUT4-RIB0-NATURAL-RT, 1ea.
4 stroguy 00002-FLUT0-RIB11-RED-RT, 1ea.
5LonghornSpencer 00002-FLUT4-RIB11-ORANGE-MAGNUM, 1ea.
/QUOTE]

Maybe this will help also I just changed my name on the list to update it correctly

[wheelife]

Is this list still good? Is everyone still in or. . .?
If your name is on the list, please confirm what part# you want.

PLEASE NOTE OPTIONS HAVE CHANGED. THERE IS NO LONGER A SATIN or "BLASTED" option as clearcoat anodize is offline.
"BRUSHED" has been added. Everyone should know what that looks like.

THOSE WHO HAVE "NATURAL" AS THEIR COLOR NEED TO DECIDE IF THEY WANT TO ADD "HP" (for high polish) OR "BR" (for brushed) OR "MACH" (for machined look) AFTER IT.

I have attached an image of what "machined look" is. These parts are old and scratched, so ignore the scratches. The light reflecting off the tool marks is what you can expect. Adding the HP option, will give you a chrome-like look.

SERIES 00001 LIST
1 LonghornSpencer 00001-FLUTE4-RIB5-ORANGE-MAGNUM, 1ea.
2 Aikidoka 00001-FLUTE4-RIB5-BLUE-MAGNUM, 1ea.
3 AJ0904 00001-FLUTE4-RIB5-NATURAL-CHARGER, 1ea.
4 AJ0904 00001-FLUTE4-RIB5-NATURAL-MAGNUM, 1ea.
5 Res18cuE 00001-FLUTE4-RIB5-NATURAL-RT, 1 ea.
6 Nightshade 00001-FLUTE4-RIB5-RED-RT, 1ea.
7 trsmagnum 00001-FLUTE4-RIB5-NATURAL-MAGNUM, 1 ea.
8 ckofod
9 2KWK4U 00001-FLUTE4-RIB5-NATURAL-SRT8, 1ea.
10 14 Tmagnum 00001-FLUTE4-RIB5-NATURAL-MAGNUM, 1ea.
11 armadillo 00001-FLUTE4-RIB5-RED-RT, 1 ea. red
12 Hazman 00001-FLUTE4-RIB5-NATURAL-MAGNUM, 1 ea.
13 American Muscle
14 Davesatdoasisbar
15
16
17
18
19
20
21
22

SERIES 00002 LIST
1 SDMagnumRT 00002-FLUT4-RIB0-BLACK-RT, 1ea.
2 wheelife 00002-FLUT4-RIB11-NATURAL-RT, 1ea. (HP)
3 goodeforu 00002-FLUT4-RIB0-NATURAL-RT, 1ea.
4 stroguy 00002-FLUT0-RIB11-RED-RT, 1ea.
5
must..ad 4 characters

[Aikidoka]

Yep, Thats still the one I want.

[legmaker72]

"Another point is that I can make the knob go lower down on the shaft so that it doesn't stick up so high. This may make a difference.[/QUOTE]

That would be great. I think the size of the knob is not too large, but in comparison to the twiggy shaft we have in the cars, it appears that way. I think the knob being lower to hide the shaft more would look better. Just my 2 cents.
If we wanted one that was lower on the shaft, would that be a big job to get one done that way?
I'm interested in getting one, I'm just waiting until all options are finalized.
Thanks for all your work...

[ESAD]

That would be great. I think the size of the knob is not too large, but in comparison to the twiggy shaft we have in the cars, it appears that way. I think the knob being lower to hide the shaft more would look better. Just my 2 cents.
If we wanted one that was lower on the shaft, would that be a big job to get one done that way?
I'm interested in getting one, I'm just waiting until all options are finalized.
Thanks for all your work...

I have decided to make that a standard feature of the 00001 and 00002 knobs.
The shaft will fit almost entirely into the knobs.

[legmaker72]

I like the design. But, it is quite overwhelming for the shaft it sits on.

The knob I have on now looked that way too, so I sewed up some leather and covered the shaft. It doesn't seem so thin to me now. Easy mod to do.

http://christopher-harrington.fotopic.net/p20779219.html

[ESAD]

The knob I have on now looked that way too, so I sewed up some leather and covered the shaft. It doesn't seem so thin to me now. Easy mod to do.

http://christopher-harrington.fotopic.net/p20779219.html (http://christopher-harrington.fotopic.net/p20779219.html)

That is a GREAT IDEA!

[legmaker72]

I have decided to make that a standard feature of the 00001 and 00002 knobs.
The shaft will fit almost entirely into the knobs.

Very cool. Now I'm in. You sold me. Now I just have to figure out what color I want. 00001 series Brushed Aluminum color with R/T on top and I'll paint the letters Black later as you said. Just wondering...there was talk about a "piston" shape. Anything ever come of that?

[legmaker72]

...or Black color with the R/T carved after so it will be silver...hmmm decisions, decisions...If we wanted one black, can the black be a Flat Black or will it be Shiny?

[ESAD]

...or Black color with the R/T carved after so it will be silver...hmmm decisions, decisions...If we wanted one black, can the black be a Flat Black or will it be Shiny?

The black will be a dull finish.
The piston is not on the table right now.
I need to get a few of these existing designs going first.
I REALLY dont think anyone will like the piston because it will deffinately look like a block on top of a needle. I don't want to go there.

GUYS, the options have been finalized (I HOPE) please review the first post and let me know what finish you want. PLEASE.

I have to go to the shop for a while. (getting busy on these knobs).

[legmaker72]

OK I'm ready to place my order!
00001-Flute4-Rib5-Black-RT1

Just so I get this right, it would be the first Larger series, in Black (which you said was Flat Black) and the R/T would be carved after showing silver. Let me know if I am correct and where, when and how much to send payment.

[Indiana Hemi]

Hey ESAD,

Tom here from the Charger forum. Please put me down for the Ball Bearing knob with the HEMI etched into it. Let me know how soon that production will start.
Thank you for your hard work and ingenuity.

[done]

Hey ESAD,

Tom here from the Charger forum. Please put me down for the Ball Bearing knob with the HEMI etched into it. Let me know how soon that production will start.
Thank you for your hard work and ingenuity.

Well hi there circle city guy. Tell us more about yourself and your car. Pictures are good.

PS: I grew up in Hamiltion County

[ESAD]

New image posted in first post should be virtually what you can expect from the 1 and 2 series knobs.

[M-Square Magnum]

I'm in for the 00002-FLUT04 in Turquoise with MAGNUM on the top. How much? When can I get it?

[LonghornSpencer]

Do you happen to have a color sample for the copper?

[SDMagnumRT]

I tell you ESAD...this things are looking better and better everytime I check back. On the flat black with the R/T cut into it....is the r/t going to be silver or black....just wondering. I am going to do a black/hemi orange theme when the Mag is all mine and the wife has her vehicle of choice.....that will be the day

[M-Square Magnum]

Soooo...when will these be available?

[ESAD]

Soooo...when will these be available?

I begin production in approx 3 weeks.

[IDSmoker]

2 3/8" Diameter ball knobs are sold.
The rest will be 2" dia. and $25 cheaper.While it doesn't look like there is enough demand for them yet, please put me down for the following choices:
Part# 00000 - BALL - 2 3/8" - Lite Black - HP - R/T Logo
Part# 00003 - T - Lite Black - HP - HEMI
I'll take whichever of these models gathers enough people for a production run first.

Am I correct in thinking that the "Lite Black - HP" option will produce something that looks similiar to black chrome? Or would "Silver - HP" be a better choice for producing this effect?



I might change my color choice depending on the answer to the following:Yes but there is NO guarantee the red will match. When anodizing things, it is best to do them all at once. This would include your shift knob because next week, the red will be slightly different.Because of this, would it be possible for you to offer a set of matching control knobs (http://cgi.ebay.com/ebaymotors/Dodge-Magnum-Knob-Cover-Set-6-all-colors-MRK-n_W0QQcmdZViewItemQQcategoryZ40017QQitemZ802743077 5QQrdZ1QQsspagenameZWDVW) and/or billet door pulls (http://cgi.ebay.com/ebaymotors/L-K-NEW-05-06-Dodge-MAGNUM-CHROME-BILLET-door-pins_W0QQcmdZViewItemQQcategoryZ33696QQitemZ802680 4321QQrdZ1QQsspagenameZWDVW) at the same time?


Before committing to any purchase I would like a better idea of what my costs would be, but I am definitely up for this mod...

Thanks!

[hand-badge-1176]

i like the one in the middle picture, does it have magnum on it, sign me up

[M-Square Magnum]

I begin production in approx 3 weeks.


YEAAAAAAA!!!! WHOOPIE!!!!
So when do you need the money?

[ESAD]

i like the one in the middle picture, does it have magnum on it, sign me up

I need a bit more info than that. :)

[ESAD]

Part# 00000 - BALL - 2" - Lite Black - HP - R/T Logo
Part# 00003 - T - Lite Black - HP - HEMI
I'll take whichever of these models gathers enough people for a production run first. OK

Am I correct in thinking that the "Lite Black - HP" option will produce something that looks similiar to black chrome? Or would "Silver - HP" be a better choice for producing this effect? There is no "silver" anodizing. It will be natural aluminum colored. "NATURAL-HP" will look like high polished aluminum (mirror finish) Black anodizing over this will give a high polished black look, but not quite like black chrome.

I might change my color choice depending on the answer to the following:Because of this, would it be possible for you to offer a set of matching control knobs (http://cgi.ebay.com/ebaymotors/Dodge-Magnum-Knob-Cover-Set-6-all-colors-MRK-n_W0QQcmdZViewItemQQcategoryZ40017QQitemZ802743077 5QQrdZ1QQsspagenameZWDVW) and/or billet door pulls (http://cgi.ebay.com/ebaymotors/L-K-NEW-05-06-Dodge-MAGNUM-CHROME-BILLET-door-pins_W0QQcmdZViewItemQQcategoryZ33696QQitemZ802680 4321QQrdZ1QQsspagenameZWDVW) at the same time?

If you send me those parts, I will anodize them with your knob.
You are looking at about $30 more to anodize your parts too.
You will have to remove the little o-rings on the door lock pulls yourself, before sending to me. And don't send me the chrome ones!


Before committing to any purchase I would like a better idea of what my costs would be, but I am definitely up for this mod... The prices are pretty firm already. The only one that is in question is the ball. They are a major pain to process, and the cost is high on them. So they will be rare.

[Davesatdoasisbar]

Esad

You have a picture of the black? I want to know if its black black or black greyish.
I really wanted yellow but the yellow isn't BRIGHT yellow like I would like.
So I could go with black and paint in my yellowing lettering instead of the other way around.

Thanks

[Res18cuE]

ESAD,

Ok, after the resizing, here's my order change: #1. 00000-BALL-2.0-NATURAL- HEMI
If you don't have enough orders for the ball then: #2. 00002-FLUT4-RIB11-NATURAL-RT.

That's final...I think....I mean, I'm pretty sure....oh just tell me where to send the money before I change my mind again!

[MR. J]

ESAD,

Are you only doing the ball with "HEMI" or can I get one with "R/T"?

[ESAD]

ESAD,

Are you only doing the ball with "HEMI" or can I get one with "R/T"?

I can do R/T.

You have a picture of the black? I want to know if its black black or black greyish.
I really wanted yellow but the yellow isn't BRIGHT yellow like I would like.
So I could go with black and paint in my yellowing lettering instead of the other way around.

The black is BLACK BLACK BLACK. DEEP DARK BLACK :)

[Davesatdoasisbar]

Esad
Is this a true statement?
The yellow in the picture is not deceiving, looks as the picture shows and is actually not a bright yellow at all?

[ESAD]

Esad
Is this a true statement?
The yellow in the picture is not deceiving, looks as the picture shows and is actually not a bright yellow at all?

BTW, what model number do you want?

It could be. Those are computer renderings and not actual parts.
I'll say that the yellow in reality is a bit brighter than that.

You should also note that the color darkens over high polished surfaces.
If you anodize a sand blasted surface, the color is brighter.

It's the same color, it's just that the rough surface resulting from blasting reflects more light to your eyes from many different directions than a high polished surface.

[American Muscle]

I think I am going to hold off until a tapered design is on the table. These look awesome but I just can' get used to the skinny rod meeting up with a large flat surface.
I wonder if someone could make a sleeve to cover that pencil rod and fit into a shifter handle to make it look more like the beef that is under the hood. Half the time I think my wife is going to snap that rod in two.

[ESAD]

I think I am going to hold off until a tapered design is on the table. These look awesome but I just can' get used to the skinny rod meeting up with a large flat surface.
I wonder if someone could make a sleeve to cover that pencil rod and fit into a shifter handle to make it look more like the beef that is under the hood. Half the time I think my wife is going to snap that rod in two.

Have you seen the revised versions posted in the first post?
I lowered them way down on the shaft to hide almost all of it!

[Pheobus]

OK I am in for the following:

00000-BALL-2.0-NATURAL-HEMI

[Davesatdoasisbar]

.........I lowered them way down on the shaft to hide almost all of it!

:roll: :shock:

[ESAD]

:roll: :shock:

Oh brother. . . . lol

[American Muscle]

Ok put me down for which ever one goes into production
Part# 00000-BALL-2.0-NATURAL-HEMI
or
Part# 00002-FLUT4-RIB11-BLACK-RT

[M-Square Magnum]

Oh brother. . . . lol


LMBAO!

[Lik2race]

Sweet brother, thanks! My balls are getting more and more popular :)
lol..can't believe HE really said that....

[ESAD]

Production is coming up fast guys! W00t!

[Flanman]

Put me down for this one-

00000-BALL-2.0-NATURAL-HEMI

[M-Square Magnum]

lol..can't believe HE really said that....

He said it. LOL

[Aikidoka]

Production is coming up fast guys! W00t!

SWEET!!!!! Cant Wait.

[67alecto]

THis thread is getting pretty unwieldy - remember I'm down for a "hemi" ball (or the R/T for that matter).

[Pheobus]

Sweet brother, thanks! My balls are getting more and more popular :)

OK now....

:)

[M-Square Magnum]

Yes!!!! I'm on the list! Hey that knife on your site looks pretty cool too. How much for one of those? You can PM me if you'd like.

[ESAD]

If any of you have been thinking about it, and havn't added yourselves to the list. Please hurry and get in on this, we need a few more people!

[Davesatdoasisbar]

ESAD
Ok my mind is finally made up...or the best it can be.
I know I kept inquiring about the yellow but I don't believe it will be bright enough so I will paint the letters yellow instead of the other way around.

Part# 00001-FLUT4-RIB5-BLACK-HP-SUWEEET

Please let me know how and when payment is required.

Thanks

[saluki450]

Esad,

Put me down for:

Part#00000-BALL-2.0-Black-Sat-R/T

Thanks!

Dan

[ESAD]

Esad,

Put me down for:

Part#00000-BALL-2.0-Black-Sat-R/T

Thanks!

Dan

Roger that Dan. Done. THANKS!

We may get there after all.

[Blowfish]

Question for you.

Would you think that these metal shift knobs would be HOT as HELL during the heat of the summer? So hot that it could print the palm of your hand "HEMI" :)

[Davesatdoasisbar]

Thanks man! That's going to look awesome! I'll have to add an exclamation point to it :wink:

Of course that extra would be on the house :wink:

[ESAD]

Question for you.

Would you think that these metal shift knobs would be HOT as HELL during the heat of the summer? So hot that it could print the palm of your hand "HEMI" :)

Only if you put a BLOWtorch to it! lol.

[saluki450]

Question for you.

Would you think that these metal shift knobs would be HOT as HELL during the heat of the summer? So hot that it could print the palm of your hand "HEMI" :)

Hey, that could be like the old TV show, "Kung Fu." When someone new rides in your car the only way they can get out is to grab the shift knob and burn HEMI into the palm of there hand. Cool.

Dan

[Davesatdoasisbar]

Hey, that could be like the old TV show, "Kung Fu." When someone new rides in your car the only way they can get out is to grab the shift knob and burn HEMI into the palm of there hand. Cool.

Dan

Kung Fu was my favorite. Thursday nights you couldn't drag me away from the TV.

[bloodraven]

I would like to take on the of the pistol-grip ones that say magnum....but say charger instead. And is it possible to get it in flat black?

[dwshootist]

I'm down for the Series 00000 Ball, natural. I would likely prefer plain with no logo - if it's required to make the number's work, I'd opt R/T. Let me know what's up.

[ESAD]

I would like to take on the of the pistol-grip ones that say magnum....but say charger instead. And is it possible to get it in flat black?

Just to be clear, that is a T, not a pistol grip.
Yes I can do flat black.
Still want it?

[ESAD]

I'm down for the Series 00000 Ball, natural. I would likely prefer plain with no logo - if it's required to make the number's work, I'd opt R/T. Let me know what's up.

Nope, you can have it any way you want it.
I'll add u to the list :)

[ESAD]

Production is rapidly approaching ladies and gentlemen.

Please get in now if you want these knobs, at these prices.

Thanks to all who have signed up!:thumbs_u:

[Aikidoka]

Production is rapidly approaching ladies and gentlemen.

Please get in now if you want these knobs, at these prices.

Thanks to all who have signed up!:thumbs_u:
I WANT MINE ... I WANT MINE. :banana:
Just let me know when you need to get payment and Ill send it right over.

[LonghornSpencer]

I' ready just let me know how and when to pay. Just PM me if you will on that

[Gonzo18]

I'm in for a "Ball" with (R/T) on it if possible. Could the R/T on top be done in black?

[ESAD]

I'm in for a "Ball" with (R/T) on it if possible. Could the R/T on top be done in black?

Read the first post carefully for info on that.

[ESAD]

I Am Ready To Accept Orders. For 00001 Series Knobs!!!

Production Will Begin As Early As This Weekend On Series 00001 Knobs. If I Can Get Everyone Pre Paid. Please Check Your Options Carefully (in The First Post) Adjust Them Now If You Need To.
This Is The Final Call For Alcohol!

Please Check The Price I Have Added To Your Listing In The First Post. Verify Your Options!!

Once You Have Verified That Your Order Looks Good, Pm Me For
Payment Details.

Once You Have Pre-paid I Will Highlight Your Name In Green!

Also, may I humbly suggest the high polish option.
It's $15 extra, but well worth it!

Thanks again! ESAD

[LonghornSpencer]

Could these be repainted, by you or someone else, at a later date if needed?
When do you expect to start on the 00002 series?
THANKS

[ESAD]

Could these be repainted, by you or someone else, at a later date if needed?
When do you expect to start on the 00002 series?
THANKS

Yes they can be.
You can strip the anodizing if you like(if anodized), refinish them any way you want!

00002 Series will be a few weeks off. I can't give an exact date yet.

[LonghornSpencer]

Yes they can be.
You can strip the anodizing if you like, refinish them any way you want!

00002 Series will be a few weeks off. I can't give an exact date yet.
Sounds good I am just worried about everything being color matched on the interior. What does it take to "strip the anodizing"?

[ESAD]

Sounds good I am just worried about everything being color matched on the interior. What does it take to "strip the anodizing"?

You can have it done, or do it yourself.
Stripping Kits are readily available online cheap.

[ESAD]

THANKS LEGMAKER72!

Payment received!

[ESAD]

Pretty soon I will begin inlaying exotic materials in the various new goodies I have planned. Such as Carbon Fiber, abalone, gold, gold lip, black lip, Mammoth ivory etc.

I think this stuff will blow you away!

[ESAD]

2KWK4U , THANKS! PAYMENT RECEIVED!

[LonghornSpencer]

Pretty soon I will begin inlaying exotic materials in the various new goodies I have planned. Such as Carbon Fiber, abalone, gold, gold lip, black lip, Mastadon ivory etc.

I think this stuff will blow you away!

Any pics of some of this stuff?

[Gonzo18]

When do you think you might start on the balls :)

[ESAD]

When do you think you might start on the balls :)


I wish I could say. Just too early to tell.

[Aikidoka]

ESAD. I just sent payment through PayPal. Cant wait to get the shifter.

Thanks again for all the effort you put into this. You:rock:

[American Muscle]

There are 11 now for the ball, I want, I want, I want! No really what is the magic number that will get the balls into production?

[American Muscle]

I have to admit I laughed writing that post! To much reference to balls and me wanting them! Can I call it a sphere from now on, people at work are looking at me.

[Davesatdoasisbar]

Knob info is correct. You should recieve PayPal today. Will not be coming from me but a co-worker.

[ESAD]

There are 11 now for the ball, I want, I want, I want! No really what is the magic number that will get the balls into production?

It was 22 for any one design.

I decided to move on the series 00001 knobs anyway, believing that I can sell them. The ball bearings are really expensive, for many reasons. I would probably not be able to do them without 22 prepaid orders.

[2KWK4U]

Esad,

I don't care how expensive they are, I really want one of those "SPHERE's" I think you need to run off a few prototypes for testing purposes.........

2KWK4U

[ESAD]

Esad,

I don't care how expensive they are, I really want one of those "SPHERE's" I think you need to run off a few prototypes for testing purposes.........

2KWK4U

I wish everyone thought that way. Don't worry, I am trying to get the materials, and annealing at a price that "I" can swallow! hehehe

[Flanman]

Mine are bigger. But seriously, I want the high polished, so please change my part number. Do you want me to pay you thru Paypal?

[ESAD]

Mine are bigger. But seriously, I want the high polished, so please change my part number. Do you want me to pay you thru Paypal?

Yes, please.

[Res18cuE]

ESAD, $15 is cheap, so please High Polish my ball.

Hee-hee-hee...I just had to say it!!! :)

[Gonzo18]

I would like my ball polished also:pepper:

[legmaker72]

I see how it is...first you get us hooked on these knobs, then go in for the kill with "exotic" car toys....I sure hope my birthday is coming up soon!

Pretty soon I will begin inlaying exotic materials in the various new goodies I have planned. Such as Carbon Fiber, abalone, gold, gold lip, black lip, Mammoth ivory etc.

I think this stuff will blow you away!

[legmaker72]

Stop teasing! It's not nice...
Where do I sign? ;-)

[Pheobus]

Change my "SPHERE" to:

00000-BALL-2.0-HP-NATURAL-HEMI

[ESAD]

I changed it for you.

Regarding the the people who have their ball "black". I will not paint them black. That ruins the whole "BALL BEARING" theme. The only thing I could do for you is black chrome. That will shoot the price up a bit. Keep this in mind!

For those that have Satin Black, steel cant be anodized. and I suggest black chrome. Then maybe I could lightly blast it. But it is what it is after that.

[2KWK4U]

I changed it for you.

Regarding the the people who have their ball "black". I will not paint them black. That ruins the whole "BALL BEARING" theme. The only thing I could do for you is black chrome. That will shoot the price up a bit. Keep this in mind!

Esad,

After giving it some more thought, I would like my "sphere" in HP-black chrome and change the text from SRT to HEMI.

thanks,
2KWK4U

[Gonzo18]

I'm getting mixed up on this code thing:doh: . I want the regular "ball", high polished, with R/T in black if that's possible. If you could set me up with that please. If you can't do the lettering in black, natural is just as good. I think my original order showed a black ball, that's not what I want. Thanks in advance!

[ESAD]

I'm getting mixed up on this code thing:doh: . I want the regular "ball", high polished, with R/T in black if that's possible. If you could set me up with that please. If you can't do the lettering in black, natural is just as good. I think my original order showed a black ball, that's not what I want. Thanks in advance!

Gotcha.

But posted in the first post is an explanation of the part numbers, and that there is an additional $25 fee for me coloring the letters. I'll do it but. . .

[Aikidoka]

So you guys can get an idea of the size of these bad boys, here is a pic.

Hey ESAD, I gotta say you have alot of trust posting that pic with some of the photoshop skills people have on here.......It coulda gotten ugly:wink:

[ESAD]

UPDATE:

The aluminum rods will be here Monday so production will start either Monday or Tuesday if everything goes as planned.

The CNC is set up and ready to go.

[Aikidoka]

YES!!!!!

[IDSmoker]

Regarding the the people who have their ball "black". I will not paint them black. That ruins the whole "BALL BEARING" theme. The only thing I could do for you is black chrome. That will shoot the price up a bit. Keep this in mind!

For those that have Satin Black, steel cant be anodized. and I suggest black chrome. Then maybe I could lightly blast it. But it is what it is after that.
Whoops... I didn't see that the balls were steel (my bad, I need to read things more carefully).

I thought that they were also aluminum, and would therefore be anodized (hence my question about the black/silver anodizing that might have produced a black chrome finish, as well as the question about the color-matching for anodizing other parts at the same time).

Oh well... guess I'll have to wait for enough people to sign up for the T-handle in order to get all of the interior bits of my Magnum done.

Meanwhile, go ahead and take my name off of the first list. I'll pass on the 'balls of steel' (sorry... couldn't resist! <grin>)

[saluki450]

ESAD,

Please change my order to:

Part# 00000-BALL-2.0-NATURAL-R/T.

If I want it black I can always powder coat it. Who knows, I might like the steel look.

Thanks,

Dan

[vtxrage]

ESAD,

I don't know how I missed this thread but these look great! How much for one of the ball types in black chrome with SRT engraved in it? PM me the price and expected lead time and how to pay.

I also really liked the layered wood series 3? The one that really caught my attention, looking at the pic, the one in the bottom row in the middle. The only change I would like is for the black parts in the layered main body area to be Carbon Fiber as opposed to metal. So it would be wood, carbon, wood, carbon....you get the idea. Any idea when these will be available and a price?

Thanks,
Jim

[ESAD]

ESAD,

I don't know how I missed this thread but these look great! How much for one of the ball types in black chrome with SRT engraved in it? PM me the price and expected lead time and how to pay.

I also really liked the layered wood series 3? The one that really caught my attention, looking at the pic, the one in the bottom row in the middle. The only change I would like is for the black parts in the layered main body area to be Carbon Fiber as opposed to metal. So it would be wood, carbon, wood, carbon....you get the idea. Any idea when these will be available and a price?

Thanks,
Jim

Thanks man! I appreciate that.
Yeah, that would be nice to have wood/CF/wood/CF.
Those Series 5 knobs are limited and would run in the $250-$500 range.

[meanmag05]

Can the "sphere" be done in black chrome and then machined so the letters are silver?

[ESAD]

Can the "sphere" be done in black chrome and then machined so the letters are silver?

No, any machining on chrome will chip it.

[ckofod]

I have not made my mind up on which to get yet. I tried looking through this complete thread but I did not see a picture of the ball bearing knob on the shifter post. Any chance of getting to see that. I have a paypal account so as soon as I make a decision I will pay immediately. Thanks.

[stroguy]

I understand this for the 00001 series orders/payments, correct. Or do you want any series payment now?

[ESAD]

I understand this for the 00001 series orders/payments, correct. Or do you want any series payment now?

This is only for 00001 Series.

[Aikidoka]

I will start tooling next week, and should have the first ones done by Friday.

ESAD

:banana: :banana: :beerchug: :banana: :banana:
That about says it all I think.

[MR. J]

OK, the more I think about it, the more I want one. Here is my order. :racing:

00000-BALL-2.0-HP-NATURAL-HEMI



Thanks ESAD

[vtxrage]

I am in for the following

00000-BALL-2.0-HP-BLACKCHROME-SRT

Just let me know when to pay and how much.

Thanks,
Jim

[Res18cuE]

ESAD, $15 is cheap, so please High Polish my ball.

Hee-hee-hee...I just had to say it!!! :)ESAD, hope you're trip is going well...but you know we still can't leave you alone! I do want to add "HP" to my order.

Thanks!

[vtxrage]

What the heck, put me down for one of the series 1 also.

00001-FLUT4-RIB5-RED-HP-SRT

I always like to change thinks up from time to time anyway. With this and the "sphere" one I should be covered. That is until you offer the series 5 :grin: !

PM me with payment options and I will pay ASAP.

Yippee,
Jim

[vtxrage]

After further review.... I would like to change the color to black please. I finally read this whole thread, whew!, and I am not crazy about the idea of the "christmas ball" effect with the high polish. On black I think it will look good, sort of like black chrome? Anyway, here is my updated order.

00001-FLUT4-RIB5-BLACK-HP-SRT

ESAD, payment has been sent. Let me know if I am wrong about the black with the high polish.

[ESAD]

Well, it wont exactly look like a christmas ball. But it will look like a reflective, colored object. Maybe a christmas ball was the wrong object to use to describe it.

[DutchMaster]

I am interested in the one on the lower-right corner of this picture: But with "HEMI" in Black!!! Put me on the list



http://www.billet-customs.com/IMAGES/KNOBS/DODGE-LX/Billet-Customs-Knobs-Series00002.jpg

[ESAD]

Well, here is the very first prototype. A few more things to tweak and off we go.

I'll tell you this. These pics do not do this thing justice. It really kicks ass. When I put it in my car I wanted to jump up and down. LOL.

http://www.billet-customs.com/IMAGES/KNOBS/DODGE-LX/Series00001Proto.jpg

[Aikidoka]

NICE!!!! Gonna look even better when their anodized. I'm sure I speak for everyone when I say we cant wait to get them!!! :banana:

[Pheobus]

That looks amazing.... Almost makes me wish I ordered one of thoes instead of the Ball.... ALMOST.

[sugar-tj]

hey esad, wow, just went through this whole thread, i think im going blind, lol, anyway when you get to the ''0003 t-natural magnum'' could you pm me? i would be in for one of those, i will also keep an eye out for them, thanks, tom

[vtxrage]

Looks great! I can't wait to get mine!

[M-Square Magnum]

Awwwww Mannn that thing is niiiicceee!

[Jaak]

Holy Crap, 27 pages of posts and this is my first read... Gotta stop working so hard!

Great work!!! But I'm a holdout for a pistol grip. Only saw one other request in here for that, so I won't hold my breath, but sure would be sweet if you do one. After all, for a Magnum that'll blow you away, it's only natural.

[Jaak]

Looking at the T handle, how tough would it be to drill and tap the hole at the end instead?

[Jaak]

OK, I'll take that as a "I'm not going to do any stinkin' pistol grip shifters as they're too much machining and so far only two guys have shown interest!".

Unless I misunderstood...:wink:

[Lik2race]

Looking at the T handle, how tough would it be to drill and tap the hole at the end instead?
That's GREAT idea ! ^5... ( high 5 )

[Davesatdoasisbar]

OK, I'll take that as a "I'm not going to do any stinkin' pistol grip shifters as they're too much machining and so far only two guys have shown interest!".

Unless I misunderstood...:wink:

Or maybe he means the 1st orders are shipping this week.:beerchug:

[ESAD]

OK, I'll take that as a "I'm not going to do any stinkin' pistol grip shifters as they're too much machining and so far only two guys have shown interest!".

Unless I misunderstood...:wink:


That is correct. Sorry. I wasn't ignoring you.

If you want a pistol grip. I'll make you one right now.
PM me for paypal info and a quote. As I said in the first post, one-offs aren't cheap. Plan on spending $350 and up.

[legmaker72]

WwwooHoooo..They are on there way soon!

[LonghornSpencer]

The Series 00001 knobs are open for orders again. Get'em while you can :)
PM me for payment info.

When are you going to start on the 00002, and post some pics of the finished 00001 series I can't wait on this one. GOOD GOING ESAD

[Jaak]

That is correct. Sorry. I wasn't ignoring you.

If you want a pistol grip. I'll make you one right now.
PM me for paypal info and a quote. As I said in the first post, one-offs aren't cheap. Plan on spending $350 and up.

Thanks, I've got my eye on an alternate that will look right at home, that's a production unit. Looking at the T handle you proposed, I figured it wouldn't be a stretch to move the hole.

I can understand how you need quantity to distribute setup costs, so I'll go with the other one. I'll keep an eye on what you're doing in case things change, however. Keep up the great work!

[Lik2race]

Thanks, I've got my eye on an alternate that will look right at home, that's a production unit. Looking at the T handle you proposed, I figured it wouldn't be a stretch to move the hole.

I can understand how you need quantity to distribute setup costs, so I'll go with the other one. I'll keep an eye on what you're doing in case things change, however. Keep up the great work!
JAAK...
In reference to " I've got my eye on an alternate that
will look right at home, that's a production unit. "
Can you say what that might be ? I would like to see
what you have in mind . May join in.
Thanks,
Stan aka Lik2race

[Jaak]

JAAK...
In reference to " I've got my eye on an alternate that
will look right at home, that's a production unit. "
Can you say what that might be ? I would like to see
what you have in mind . May join in.
Thanks,
Stan aka Lik2race

OK, but I'll post it in another thread, as I don't want to dilute this one, or take it off topic.
http://www.lxforums.com/board/showthread.php?t=23723

[ESAD]

When are you going to start on the 00002, and post some pics of the finished 00001 series I can't wait on this one. GOOD GOING ESAD

Well, I said from the beginning that I would need a minimum of 20 people to make any one of the designs. I went ahead with the Series 00001 knobs with only 10 people signed up (Four of those backed out; really depressing) because I knew some of the guys had their hearts set on these knobs.

I have spent well over $1000 of my own money setting this up, and it takes time. I am doing this when I have nothing else that needs my attention.
I have a bunch of the parts run, but now I have to program all of the different logo's. Proof them out, etc. I will be spending much of this weekend running the pre-paid knobs. Those that didn't opt for anodizing or high polish will go out right away. Those that did, will ship late next week baring any unforeseen issues.

None of the other knobs will be made without a minimum of 20 prepaid people signed up.

[legmaker72]

Esad,
I'm sorry to hear that so many people backed out on this. You have obviously put in alot of your own time and money in presenting this offer to everyone here. You should know that your hard work is appreciated by many here.
Just wanted you to know that.

[Pheobus]

Only 8 more people needed for the ball. Come on guys! You know you want to tell everyone you have THE BADDEST BALLS ON EARTH!

[Gonzo18]

I also would like to thank him for all his time and effort. Come on people, let's get our balls on a stick!!!

[ESAD]

Gentlemen,

Thanks for your kind words, I know those that are interested are very interested. I also know for a fact, that you will love these.

I think from now on, I will have to take a non refundable deposit just to get on the list. I think that will help everyone stay interested :)

I just rolled in from the shop and am that much further along.
Will go back tomorrow afternoon with all my logo programs, download them into the machine and start finishing this first buncha knobs.

[stroguy]

ESAD, move me from the 00002 series to the ball. I'll take it polished also please sir. I have not been replying to this thread that much due to the fact that it is so long. But you know I was here from the word go and I still want a custom knob. PUT ME DOWN FOR A HIGH POLISHED BALL, "HEMI".


Randy

[Gonzo18]

ESAD, I think I would like to change form R/T on the ball to the standard "Hemi"

00000-BALL-2.0-NATURAL-HP-HEMI Thanks, hopefully we can get this done in the next group. Just let me know when you need payment.

[ESAD]

ESAD, I think I would like to change form R/T on the ball to the standard "Hemi"

00000-BALL-2.0-NATURAL-HP-HEMI Thanks, hopefully we can get this done in the next group. Just let me know when you need payment.

HEMI isn't standard. You can have R/T at no additional cost if that is what you are thinking. Let me know.

[Gonzo18]

Sorry, I meant standard as in everyone else getting it. I think it would look better with "Hemi" written on it, thanks.

[Aikidoka]

Man I feel like a 9 year old kid waiting for Christmas and its only July. I cant wait till their done and shipped out :banana: :banana: