PDA

View Full Version : 20" Foose Nitrous on a SRT-8

Nomad
12-16-2005, 06:05 PM
Will they fit? I'd like to put 20x8.5 front and 20x10 rear.
Cam
12-16-2005, 06:30 PM
yup.
Nomad
12-16-2005, 06:35 PM
Did you see these wheels on an SRT-8? Any pic's?

I am concerned that they will not clear the Brembo calipers.
SoCal_Magnum
12-16-2005, 06:36 PM
They will fit dude...like 5 or 6 people on this forum have the same wheels. Also, another guy just started a thread looking for the same wheels too...guess you 2 will bump the total up to 8 :roll:


request: originality
status: denied
:(
Nomad
12-16-2005, 06:44 PM
Hmmm. I've Searched the entire forum and did not come up with one picture or discussion of anyone that has this wheel combo on an SRT-8. Don't mean to impose but could you direct me to an owner/pic?
Cam
12-16-2005, 06:48 PM
The reason I said yup. Is I checked on wheel fit with the SRT8 brakes (I will be changing mine). Brembo supplied me with a fit gage to check for clearance issues. All was good.
Nomad
12-16-2005, 06:55 PM
The reason I said yup. Is I checked on wheel fit with the SRT8 brakes (I will be changing mine). Brembo supplied me with a fit gage to check for clearance issues. All was good.

Would you mind sharing the fit "gage"?

That would allow me to test the fitment on several other wheel combo's.
Cam
12-16-2005, 06:59 PM
Here ya go.

http://www.stoptech.com/tech_info/charts/98-241-2470-00.PDF

http://www.stoptech.com/tech_info/wheel_fitment.shtml
Cam
12-16-2005, 07:03 PM
If you need additional info PM me. The company that supplied this is not a vendor to this forum and I don't want to piss anyone off. Sorry if I offended anyone already, just trying to help a brother out.
Nomad
12-16-2005, 08:16 PM
Thanks Cam. I appreciate your assistance. I have communcated with these folks in the past and this gage is for their Big Brake Kit for a non-SRT fitment. Their kit is not a Brembo caliper and their dimensions are going to be different.

Maybe SoCal_Magnum will come back with an SRT owner that has already put this wheel package on their ride.
Cam
12-16-2005, 09:14 PM
Pm me your email address, I'll forward you the entire email from them. This might clear things up. That fitment was supposed to be for the brembo kit, I check it after purchasing my wheels. I would assume it should fit, I might be wrong. Long term lose of short term memory.
SoCal_Magnum
12-16-2005, 10:06 PM
Don't know anybody with them on an SRT, but I know there were at least 3 sets at the October socal meet on 2 RTs and an SXT

Maybe SoCal_Magnum will come back with an SRT owner that has already put this wheel package on their ride.
Cam
12-16-2005, 10:49 PM
Is there a SRT8 owner in the Riverside area?. If so maybe get ahold of me and we can schedule a time to check for wheel fitment.
FactoryD
06-30-2006, 10:34 PM
OK. I've been schemeing a way to get me into a SRT Magnum and this is my only reservation.

Did we figure out if the 20x10 will fit over the rear Brembos? Please say, "yes, they will fit"! :grin::popcorn::popcorn::popcorn:
402 Motoring
07-03-2006, 10:56 AM
yup.

Nope. not without a spacer on the front.
402 Motoring
07-03-2006, 10:59 AM
Thanks Cam. I appreciate your assistance. I have communcated with these folks in the past and this gage is for their Big Brake Kit for a non-SRT fitment. Their kit is not a Brembo caliper and their dimensions are going to be different.

Maybe SoCal_Magnum will come back with an SRT owner that has already put this wheel package on their ride.

I've already tried this package on a SRT8 and I'm telling you they don't fit without a spacer!..... Brembo Brake wise