PDA

View Full Version : Challenger Ram Air Kit

Grey Ghost
09-07-2009, 06:39 PM
This thing looks cool!! I have one ordered and looking forward to testing it out. Cervini did a pretty good job with the design, and it’s priced right, comparing it to standard CAI’s where all you get is a filter and a air tube mostly.

https://www.cervinis.com/product.asp...1&id=1225#4385 (https://www.cervinis.com/product.aspx?car=1&id=1225#4385)
rcboarder76
09-07-2009, 07:36 PM
they make pretty good stuff my dad and i have ordered a few things from them for our mustangs a while back...
Steve HR Hooligan
09-07-2009, 09:21 PM
Very nice thanks for posting
hemicanucksfan
09-08-2009, 01:46 AM
go get one steve. get the spoiler too. might be kinda cool.
silentbob09rt
09-08-2009, 03:11 AM
That spoiler looks like the factory one on my 91 camaro. That ram air kit looks pretty cool. Tell us how it works out for you.
Challenging Times
09-08-2009, 07:22 AM
Looks pretty sweet. Post up and show us the install...
charginscott
09-08-2009, 08:17 AM
That does look good - way better than the CDC version. I like the way you can still see the motor.
HemiR/T
09-08-2009, 08:48 AM
"you will experience increased throttle response and gains in horsepower from (40mph to 70 mph and above)"

maybe a small typo?

i wish there was something similar to the magnum like this. ram air looks sick
FL3JM
09-08-2009, 03:31 PM
Yeah, increased hp from high speed is bull****. Even at very high speed (160+ mph) the increased pressure isn't very significant.
The real benefit is that you don't suck up warm air close to the ground (it can get pretty hot a sunny day).
Then again if you have a black hood it can get pretty hot too, and having a big warm engine on the other side doesn't really help the cooling. :)

It looks awesome and sounds awesome tho, and that alone is worth it all. :) Chicks dig it! :D
hifees
09-08-2009, 03:36 PM
That looks nice........
Fast56k
09-08-2009, 11:12 PM
The price is pretty sweet at only $299 for everything. Can't buy a Mopar CAI for that.

C.
hemiwrx
09-11-2009, 07:02 PM
Looks pretty sweet. Thinking about getting one for myself, but I wonder if its compatible with the diablosport cai tune on the predator.
Challenger370
09-11-2009, 07:57 PM
This thing looks cool!! I have one ordered and looking forward to testing it out. Cervini did a pretty good job with the design, and it’s priced right, comparing it to standard CAI’s where all you get is a filter and a air tube mostly.

https://www.cervinis.com/product.asp...1&id=1225#4385 (https://www.cervinis.com/product.aspx?car=1&id=1225#4385)

Finally a CAI that puts the C in CAI, not the typical HAI that most sell.

Its the way the car should have came from the factory to begin with.
Challenger370
09-11-2009, 08:10 PM
Let us know how it works out, and how it works when driving in rain, or if there is snow on the car blocking the intake, etc.
Steve HR Hooligan
09-11-2009, 09:48 PM
go get one steve. get the spoiler too. might be kinda cool.

I tell ya Sheldon the price is right for the CAI, the spoiler i can do without, unless it would look kool on the back of a Magnum lol:rock:
Galvatron
09-11-2009, 10:45 PM
i'm curious as to why it says will only work on R/Ts and SRT8s....from what i can tell, it looks like the outlet WILL dump "cold" air right on top of my filter on the Big Bully. i can only assume they're saying that because the V6 cars don't come with the "functional" scoops, but i've added those. i WOULD like to try this....but at $300 for something that may or may not work....i dunno....

especially since a V6 shaker will probably NEVER come....
silentbob09rt
09-12-2009, 12:17 AM
I dunno I kinda like the spoiler. It looks like the one on my 91 z28. That would be a heck of a pic with both of my cars with high rise spoilers from the rear.
Challenger370
09-12-2009, 12:36 AM
i'm curious as to why it says will only work on R/Ts and SRT8s....from what i can tell, it looks like the outlet WILL dump "cold" air right on top of my filter on the Big Bully. i can only assume they're saying that because the V6 cars don't come with the "functional" scoops, but i've added those. i WOULD like to try this....but at $300 for something that may or may not work....i dunno....

especially since a V6 shaker will probably NEVER come....

Its designed to mate up to the intake system into the throttle body. Much of it would work with the v6, but the plumming out of the box that holds the filter to the throttle body would be the issue.

Personally I think they should design it for the V6. It would be great.
jstkilntim
09-12-2009, 08:32 PM
Definitely looking forward to a review.
Challenging Times
09-13-2009, 08:23 PM
I'll have to go look, but I think the stock boxes in the se and the r/t are in the same position... Did I miss it in the pic? Doesn't this go to the top of the stock box?


After looking at the pic again.. I think it would work.. Just have to install the functional scoop into the slots in the hood...
Challenger370
09-14-2009, 06:34 PM
The throttle body is in a different location for the v6
Steve HR Hooligan
09-14-2009, 10:03 PM
The air box is in a different location on the v6 cars, it would take some modding to make it work
hemicanucksfan
09-14-2009, 11:39 PM
i'd be worried about interference between the ducting and the intake tube on a 3.5, depending on how low that ducting sits
Challenging Times
09-16-2009, 07:40 AM
i'd be worried about interference between the ducting and the intake tube on a 3.5, depending on how low that ducting sits


Didn't pay attention to teh inlet positions.. Not sure that the left side would clear the pipe for the intake.. With the airbox turned, it may cause issues with the fit as well... Hurry up and make one for the 3.5!!!!!!!!!!!!!!!!!!