My new Rims

[Therealgreyfox]

Here's my test fit with them. "no rubber" They are Advanti Racing A2's 20" with a +25 offset... 9" in front with 10" in the rear.... DEAD SEXXXXY ... Ill get them mounted tuestday and post more pics:pepper:



http://www.lxforums.com/board/attachment.php?attachmentid=17268&stc=1&d=1242568695

[89grand]

Are you sure that offset is right? +25 is a more than what we usually run. My old 20's and me new 22's are both +18.

My fronts still rubbed on the spindle support and I had to add 3mm spacers. Part of it is my tires, they look fatter than most 265's.

[fireman2118]

with a +25 offset in the front, your going to have use spacers. +18 is recommended. 7mm more will mean you'll be almost 1/4" closer to the spindle assembly. The +25 should be fine for the rear 10"

[Therealgreyfox]

You know what.. lol I think I got confused ... maybe not about the rear but now that I think about it the salesman said that the bigger offset +25/+30 Is for the AWD cars and the smaller offset's are for our RWD's... does that sound right? Ill look at the boxes in a min

[Therealgreyfox]

They way everything looks and felt though, I have no clearance issues

[Therealgreyfox]

a couple of the face



http://www.lxforums.com/board/attachment.php?attachmentid=17288&stc=1&d=1242597781http://www.lxforums.com/board/attachment.php?attachmentid=17289&stc=1&d=1242597858

[89grand]

They way everything looks and felt though, I have no clearance issues

If they are actually a +25 offset, you won't really see the problem until the front tires are installed. They'll almost surely rub the spindle support if that offset is what you think it is.