PDA

View Full Version : Anything new in the tuner world?

pir8magnum
03-30-2009, 04:03 PM
I haven't been doing the forums much recently, so I'm kind of out of the loop. Whats new in tuners for the LX cars? Anything?

When I was heavily into it the only two options were the Predator and the Superchips Flashpaq. Any newcomers or developments?

I had a Predator before on my SRT8 (and a Superchips prior to that on my old 5.7), but ended up selling it. Now I'm thinking about getting a tune on my Mag again but just wonder if anythings changed in terms of whats available.
JarZ
03-30-2009, 04:10 PM
Predator still the king but custom tuning with it has come a big step further
Hemi_charger
03-30-2009, 04:28 PM
Diablo is still the best out there if you by one from hhp right now there give you a free stage one tune

I haven't been doing the forums much recently, so I'm kind of out of the loop. Whats new in tuners for the LX cars? Anything?

When I was heavily into it the only two options were the Predator and the Superchips Flashpaq. Any newcomers or developments?

I had a Predator before on my SRT8 (and a Superchips prior to that on my old 5.7), but ended up selling it. Now I'm thinking about getting a tune on my Mag again but just wonder if anythings changed in terms of whats available.
Jected
03-31-2009, 12:00 AM
MOTEC

http://img.photobucket.com/albums/v668/jected/Engine%20Rebuild/IMG_1377.jpg
http://img.photobucket.com/albums/v668/jected/Engine%20Rebuild/IMG_1378.jpg
http://img.photobucket.com/albums/v668/jected/Engine%20Rebuild/IMG_1379.jpg
metgo
03-31-2009, 02:09 AM
I think SCT has tuning available, although I don't know of anyone using it.
InferAl
03-31-2009, 07:20 AM
MOTEC

http://img.photobucket.com/albums/v668/jected/Engine%20Rebuild/IMG_1377.jpg
http://img.photobucket.com/albums/v668/jected/Engine%20Rebuild/IMG_1378.jpg
http://img.photobucket.com/albums/v668/jected/Engine%20Rebuild/IMG_1379.jpg

More info on MOTEC
Blown7
03-31-2009, 07:20 AM
MOTEC





X2
At this stage the Motec is really in it's infancy and very expensive, but yes the software in the Motec will beat the OEM Chrysler stuff manipulated by the Daiiiiiablow CMR any day.

(I really need to PM you sometime Jected, and get some info)
pir8magnum
03-31-2009, 12:15 PM
Is that Motec a tuner? Or a complete replacement for the stock programming box?

X2
At this stage the Motec is really in it's infancy and very expensive, but yes the software in the Motec will beat the OEM Chrysler stuff manipulated by the Daiiiiiablow CMR any day.

(I really need to PM you sometime Jected, and get some info)
Blown7
04-01-2009, 07:58 AM
Is that Motec a tuner? Or a complete replacement for the stock programming box?

A complete replacement for the PCM.

It has it's own software that is 100 percent tunable.
roswald0511
04-01-2009, 09:19 AM
A complete replacement for the PCM.

It has it's own software that is 100 percent tunable.


Actually, I think they are just using it as a fuel and ignition computer to piggyback his OEM computer because Jected says he still retains all of his stock guages and stuff.
Blown7
04-02-2009, 07:08 AM
Actually, I think they are just using it as a fuel and ignition computer to piggyback his OEM computer because Jected says he still retains all of his stock guages and stuff.

I'm not sure how Jected's set up. but the 100 seires Motec's do have Can Bus interface capability so theroredically it can send it's own messages.
Jected
04-02-2009, 05:37 PM
Hey guys sorry for the delay. The car is running the MOTEC M800 engine management system and the MOTEC CDI-8. Yes it most definitely runs everything in the engine bay (every sensor etc) as well as interfacing with the CAN BUS system so that I still have dash, radio everything else etc.

I don't know enough about it myself to confidently expalin exactly how it all works but I do know that it was hard wired into the car. From here everything that needed to be run had to be coded into the MOTEC system to enable it to understand/read the signal.

MOTEC were sent parts from the such as my accelerator pedal, both OEM and Arrignton throttle bodies, Crank angle / cam sensors, OEM PCM and so on and so on so that the code could be written for the M800 to function. Other sensors had the signals read by HP/F and the data thenn sent to MOTEC who again wrote a code and emailed it back to them. Thats about my undertanding of it if that makes sense.

I do know (and again nothing against Diablo) that the MOTEC can offer so much more tuning ability than the OEM PCM can allow and this was needed especially when we wind the boost up.

Hope thaa makes sense.
MadCharger
04-02-2009, 07:31 PM
HP Tuners is working high priority on Dodge tuning also........

http://www.hptuners.com/forum/showthread.php?t=19609
Blown7
04-06-2009, 02:14 PM
HP Tuners is working high priority on Dodge tuning also........

http://www.hptuners.com/forum/showthread.php?t=19609

Yea but that will just compete with the CMR

The stand alone idea with the Motec is where it's at.