View Full Version : What is required
harry
02-16-2009, 03:21 PM
Unless I am that blind...what do I need to do to remove the amber side marker lights to replace them with either the clear or the smoked? I didn't see a mounting screw or anything while looking at them. Plus, with a grill swap...I have seen a ton of photo's that show folks removing the entire front facia to do so. Is it really that complicated? Sorry for the retarded questions.
Super T
02-16-2009, 03:51 PM
Remove 'em from the back side, you can probably get to it from under the car w/ the belly pan removed.
harry
02-16-2009, 03:58 PM
Thanks.
Bigdirtyd
02-16-2009, 09:55 PM
I had to remove my whole fascia to get to them and install new ones Snug. You might be able to get to them the way mentioned above. But it's hard to get an arm in there do loosen and re-tighten the new ones in. Good Luck!!
stitchmonkey
02-17-2009, 01:13 AM
Driverside Crank the wheels hard right, remove the plastic wheel well push pins reach in with a socket cant remember the size only one nut. Do the same on the other side. If you're running 22"s you may want to jack the car upor take the wheels off? I've done it twice now with out taking off the wheels.
harry
02-17-2009, 05:45 PM
Thanks for the tips. Might get a set with tax refund. How about the grill? it looks like a PITA to swap that?
stitchmonkey
02-17-2009, 11:54 PM
Thanks for the tips. Might get a set with tax refund. How about the grill? it looks like a PITA to swap that?
The grill you'ld have to remove the whole fascia. real easy!
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.