PDA

View Full Version : To My Fellow AirRide Geeks

lowriderman3
08-30-2008, 10:31 AM
Anyone that is running AirRide, running different bags in the front from in the back, or vice-a-versa? I have UAS all the way around, but have been looking at bags that can hold more PSI, and are made different than just the clamp type I have on my car.

I am looking at putting Slam Specialities in the back.
GROUNDED
08-30-2008, 01:24 PM
IM running RE5 slams in the back. I think there too small for this car especially with 3 people and gear in the back. I would try to shoehorn in a re6 if possible seeing as the size difference is minimal when compaired to the uas bags and the inclreased volume will help lift the car to ride height at a lower psi. You would probably have to offset the bag to get it to fit in there.


Eventually I plan on making a wood mockup bag ( 6.25" diameter x 3" tall) with my studs added to it and see where I can make that bag fit.
MOL SRT-8
08-30-2008, 01:37 PM
please keep me informed on how it works.
ICLOSEM
08-30-2008, 03:25 PM
There should be no problem fitting a 2500lb bag in the rear of these cars. you will just need a custom bracket built
GROUNDED
08-31-2008, 10:25 AM
the RE6 is actually a 2500 lb bag and has a 6" diameter where as UAS is 5.875. The bag grows .0625 radially. You can still use UAS cups. I am eventually going to swap my re5s for these re6s and see what happens.
lowriderman3
08-31-2008, 11:08 AM
the RE6 is actually a 2500 lb bag and has a 6" diameter where as UAS is 5.875. The bag grows .0625 radially. You can still use UAS cups. I am eventually going to swap my re5s for these re6s and see what happens.
Thanks for that info!
GROUNDED
08-31-2008, 05:52 PM
slams have internal bumpstops as well!