nitrous plate rated to?

[RDunn]

what are the nitrous plates rated to....i.e...how big of a shot can you run thru it.

[sinistersix]

are you talking about the throttle body plate from nitrous outlet? Like the same one me, 1fast4door, and k4000 are running? I believe scott is running a 150 shot through his, but on the chart it goes up to 200

[RDunn]

ya thats what im talking about.

200 will work for the first stage....then i will keep the zex on there for a 2nd and spray a 75 shot

[ko4000]

The plate comes with jetting up to 200. I am not sure if it flows more than that.

[roswald0511]

R Dunn, Contact Nitro Dave at Nitrous Outlet. He can get you an answer.

Off topic, did you end up testing anything over a 100 shot on the stock bottom end?

[Ray@NitroDaves]

The plate can flow up to 400HP....;)

[RandomAccess]

The plate can flow up to 400HP....;)

can the -4AN hose keep up with that? I thought beyond 300 shot you have to upgrade the hose.

[1FST4DR]

Good question^^^I know you should at least run 6 from the bottle.I assume you mean from the noids to the plate??

[RDunn]

Off topic, did you end up testing anything over a 100 shot on the stock bottom end?


running a 125 shot right now...bout 4 bottles so far

[RDunn]

The plate can flow up to 400HP....;)


good to know,im going to run a 200 out of it,then a 75 on the top from the other stage in 3rd gear

[roswald0511]

running a 125 shot right now...bout 4 bottles so far


You know the unwritten rule is after 4 bottles, you have to go to a bigger shot. :rock:

[RandomAccess]

Good question^^^I know you should at least run 6 from the bottle.I assume you mean from the noids to the plate??

Yeah... exactly what I mean... and the other piece is what are the noids rated at as well. I don't think the Zex system goes beyond 150 IIRC

[RDunn]

yeah, im only going to spray a 75 from the zex. im going to buy another kit with the plate system from nitrous outlet

[mhigham]

You know the unwritten rule is after 4 bottles, you have to go to a bigger shot. :rock:

^^^What he said^^^ :rock:

I think you would be fine past 200, the limiting factor would be the rest of the system, which it sounds like you are replacing anyways. I run 125 no problems.

Mike

[sinistersix]

^^^What he said^^^ :rock:

I think you would be fine past 200, the limiting factor would be the rest of the system, which it sounds like you are replacing anyways. I run 125 no problems.

Mike

So running the 125 you have had no problems with the rear end or anything else on an RT? Hmmmmmm:modding:

[Ray@NitroDaves]

A 4AN feed line can max flow 400HP...but this assumes no tight bends or kinks.
It is best to run a 6AN feed line if you are wanting to run a large shot

The solenoids in our kits will flow 400+

To run higher than 175 or so you will also need a 4AN line to run from the nitrous solenoid to the plate...but the plate fitting is 3AN. We have a (SHO) line that is a 4AN line with a 3AN nut on one end for this purpose.

If you are going to use our plate with a ZEX system please specify when you order tha larger line and we can make it with 3AN nuts on each end. The ZEX solenoids will max flow 200 HP.

[RDunn]

no im going to have 2 seperate systems on the car. im going to order a complete new system and plate from you guys and spray a 200 shot on it.


then im going to jet my zex kit down from the 125 im spraying now to a 75 shot.. and use it as a second stage,to spray in 3rd gear

[Nitro Dave]

Sounds good. If you need a -6 hose just let us know. We can upgrade it for a small amount.
Dave

[wickedchargerrt]

well i feel a bit more confident about the reliabilty of a 75 shot after reading this thread

[Nitro Dave]

Good deal. 75 shot should be a walk in the park. Let us know if we can answer any questions.
Dave