Exhaust tips

[tank8289]

Ok i need to replace my exhaust tips from my slp system. Theyre small, discolored, hideous, and i cant get them clean. Because the slp system is so short i'm going to need something at the least about 10 inches in length. Im looking for something from 4 to 5 inches outlet, but the only ones i can find with that outlet and length are truck ones with an inlet of 4 inches. Can i modify the tip to fit? Any other tips you guys have for suggestions?

Thanks
Bill

[DannyC]

Go to a muffler shop. They can hook you up. Do you still have your resinators on? By the way ask for SS tips. I think mine were called Ecco Chaimbers.

[tank8289]

i cant stand my local muffler shops, theyre such rip offs!

[tank8289]

I found this one, but i was really looking for 5"

http://www.jegs.com/i/Gibson/462/500552/10002/-1

[DannyC]

If you still have your resinators you may run into a problem cus the factory tips are made onto the resinator. That's why they are short.

[MikeEast]

Check out some Zoomers Cannon tips - resonated, kills drone and are about 10" long.

Mike

[tank8289]

I dont have resonators, as i said i have the slp loudmouth system.

[tank8289]

So if i buy a 5" outlet exhaust tip thats 12" long and has a 4" inlet, can i modify the inlet to get it to fit on my 2.5" slp system?

[betta510]

This is off subject, but do you have any cracks on your muffler? I have the SLP too and my s**t cracked.

[tank8289]

No but its a common problem of the muffler weld breaking, call them up they have a lifetime warranty.

[moonstreaker]

Summit Racing has over 500 exhaust tips. Here are a few that fit your criteria. There is a much larger selection if you went with a 3.5" tip instead of 4"+.

http://store.summitracing.com/partdetail.asp?autofilter=1∂=MPE%2D35117&N=700+4294923429+4294922678+115&autoview=sku (http://store.summitracing.com/partdetail.asp?autofilter=1&part=MPE%2D35117&N=700+4294923429+4294922678+115&autoview=sku)

http://store.summitracing.com/partdetail.asp?autofilter=1∂=SUP%2D756%2D2514&N=700+4294923429+4294922678+115&autoview=sku (http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUP%2D756%2D2514&N=700+4294923429+4294922678+115&autoview=sku)

http://store.summitracing.com/partdetail.asp?autofilter=1∂=HOK%2D22010HKR&N=700+4294923429+4294922678+115&autoview=sku (http://store.summitracing.com/partdetail.asp?autofilter=1&part=HOK%2D22010HKR&N=700+4294923429+4294922678+115&autoview=sku)

http://store.summitracing.com/partdetail.asp?autofilter=1∂=MPE%2D35146&N=700+4294923429+4294922678+115&autoview=sku (http://store.summitracing.com/partdetail.asp?autofilter=1&part=MPE%2D35146&N=700+4294923429+4294922678+115&autoview=sku)

[Ups-Charger]

You could go with something like http://www.jegs.com/i/SLP/847/F31040/10002/-1 and weld on some extra pipe. I ordered 2 of them on sunday and should have them here wednesday. Ill take some pics when i get them installed

[Sublimeon22s]

Im running a set of the first ones listed in the links above and love them (magnaflow 35117) 2.5" inlet x 4" outlet double rolled slant x 18" long

[tank8289]

Im running a set of the first ones listed in the links above and love them (magnaflow 35117) 2.5" inlet x 4" outlet double rolled slant x 18" long


You got any pics?