PDA

View Full Version : Manual seat to power seat question


BigHemi06
02-14-2008, 06:44 PM
Looking to upgrade to SRT seats, my passenger seat is manual, and the SRT seat is power. So my question is are our cars prewired already so all I would have to do is plug it in, or what do I need to do to make the conversion?? Thanks for the help!!!

Bryan

JetBlack300c
02-14-2008, 06:48 PM
not pre wired on the passenger side, but easy to do..

since you have a Charger no memory seat module to deal with (as long as you don't buy 300C SRT seats)

there is a harness on the drivers side If I recall the wires are RED, GREEN and Black..

splice them and run the leads under the console to the new passenger seat and splice into the same connector/colors on that side..

takes 10 minutes tops...


when you get the seats hit me up in PM and I'll see if I can locate the actual connector for you, then you tap the wires on the drivers side and plug into the passenger side and you won't need to cut the connector off of the passenger seat..



***** edit, I just realized you have a HEMI, my experience has been with base models where power passenger seat was NOT an option, and it IS an option on the HEMI..

you might be prewired, look for a GREY connector under the carpet with a RED/GREEN/BLACK wire coming out..

BigHemi06
02-14-2008, 07:20 PM
It looks different under the passenger seat here are some pics

http://i243.photobucket.com/albums/ff175/chopperguy83/DSC00266.jpg?t=1203034732


http://i243.photobucket.com/albums/ff175/chopperguy83/DSC00268.jpg?t=1203034789

JetBlack300c
02-14-2008, 07:29 PM
this is the plug you need to find:

http://i9.photobucket.com/albums/a53/mjeds/KB-1/PIC-0010.jpg
http://i9.photobucket.com/albums/a53/mjeds/KB-1/PIC-0011.jpg
http://i9.photobucket.com/albums/a53/mjeds/KB-1/PIC-0012.jpg
http://i9.photobucket.com/albums/a53/mjeds/KB-1/PIC-0013.jpg
http://i9.photobucket.com/albums/a53/mjeds/KB-1/PIC-0014.jpg

BigHemi06
02-14-2008, 07:35 PM
Ummm I didnt see anything like that under the passenger seat

JetBlack300c
02-14-2008, 07:43 PM
it's there.... has to be.. that is the power connection..

BigHemi06
02-14-2008, 08:10 PM
Its gotta be under the carpet then, hopefully keeping my fingers crossed it will be there when I pull everything out LOL

JetBlack300c
02-14-2008, 08:22 PM
like I said, it might not be..

but the other end is on the seat...